Models

From the International Hydrofoil Society (IHS) Hydrofoil Correspondence Archives

 

Hydrofoils: Models

Hydrofoils: Models      Scroll To Top Top

 

Archived Messages

Count,MessageID,category,ShortTitle,Message,Date,UserName,MsgPswd,Phone,Email,ParentMsgId

 

“1”,”937916″,”7″,”Water jet system of my RC pegasus ||937916″,”Excellent photos and attachment… an inspiration to others!”,”2005-11-25″,”Barney C Black”,”nopswd”,” “,” “,”934934”

“2”,”936876″,”7″,”‚vater jet system of my RC pegasus ||936876″,”Yoichi,

Congratulations on the successful construction of a waterjet powered hydrofoil model. You may be the first person who has done this!

I see from your photographs that you have made the inlet ducts larger than scale size in order to reduce frictional losses. At some stage please write more about the design and how well it runs. For example, you could tell us about the source of waterjet pump, motor voltage and current and running time of the model.”,”2005-11-22″,”Martin Grimm”,”nopswd”,” “,”seaflite at alphalink.com.au”,”934934″

“3”,”934934″,”7″,”‚vater jet system of my RC pegasus ||934934″,”It introduces the water jet system of the RC pegasus model ship of me who succeeds in surfacing in the first launching introduced in the summer of this year. The secret of the success in my RC pegasus was to have reproduced the research of the pegasus of the thing, and building in the miniaturization and the RC system faithfully. The principle of not the mimicry of the style but the thing was reproduced. The water duct system was researched according to the material of IHS. The water duct system with a little resistance demonstrates the ability of the water jet pump enough. This concludes my report. “,”2005-11-19”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”7″

“4”,”923354″,”7″,”Model Magazines and Plans for sale||923354″,”I put a big batch of hydrofoil magazines with articles on hydrofoil models up for auction on ebay.com. Search for item number: 6985656455. Bidding starts at 6.95 USD. Auction ends Nov-09-05 10:34:41 PST. In addition to the magazines, there are three large, separate full size plans for building hydrofoil models. Both sail and motor powered models are represented, as are display and working models. Some of the working models can be radio-controled; others you just set the rudder for a circular or straight course.

This would be a good instant collection for any modeler interested in hydrofoils. It could also be a resource for a high school science teacher or scout leader interested in offering kids a chance to build and test a hydrofoil as a school project.
“,”2005-10-31″,”Barney C Black”,”poopdeck”,” “,” “,”7”

“5”,”921349″,”7″,”Re; Hegi police Hydrofoil||921349″,”Hello,
If your in europa please mail me at info@dutchhydrofoils.com
about he hegi.
Regards Mark”,”2005-10-27″,”Mark van Rijzen”,”nopswd”,” “,”info@dutchhydrofoils.com”,”916576″

“6”,”920909″,”7″,”Hydrofoil Models||920909″,”This is a website I found with some scale hydrofoil models. Check it out. www.scalespeed.com”,”2005-10-26″,”Rick”,”nopswd”,” “,”1chef987@comcast.net”,”7″

“7”,”920905″,”7″,”Re; Hegi police Hydrofoil||920905″,”If you are interested in selling this boat please contact me.”,”2005-10-26″,”Rick”,”nopswd”,” “,”1chef987@comcast.net”,”916576″

“8”,”917254″,”7″,”Re; Hegi police Hydrofoil||917254″,”This sounds like a good candidate to be offered for sale internationally at auctioni on eBay.com”,”2005-10-20″,”Barney C Black”,”poopdeck”,” “,” “,”916576”

“9”,”916576″,”7″,”Hegi police Hydrofoil||916576″,” I have a Hegi Police Hydrofoil Model , the box is not in the best condition, but the model is in New condition. Everyhting appears to be there along with the Tube of Glue, witch I sure is no longer any good.I would like to sell or trade for other Boats. I’m into Fast attack. Thank you Marc “,”2005-10-19″,”Marc Tieben”,”nopswd”,” “,”marc17mach4@aol.com”,”7″

“10”,”894281″,”7″,”My three RC hydrofoil craft introduction.||894281″,”It introduces each part of my PHM.
It concentrated on the research of the hydrofoil system of the pegasus, not my ruining the function when producing it though I faithfully attempted simplifying by it as a radio controller model, and reproduction. The waterway duct of the hydrofoil that the surfacing power influences is a result of the research.
After all, there was a Japan and United States distances, too and it was impossible though it actually went to the museum and the locale in the United States where the pegasus was put and it had wanted to do a detailed observation.
However, abundant images of IHS served as a reference very much.
“,”2005-09-14”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”888238″

“11”,”889917″,”7″,”My three RC hydrofoil craft introduction.||889917″,”Thank you. Barney san
I will continue, be fresh, produce the RC model of the surprise, and introduce it with
this BBS.
“,”2005-09-07”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”888238″

“12”,”888238″,”7″,”My three RC hydrofoil craft introduction.||888238″,”Awesome!”,”2005-09-04″,”Barney C Black”,”poopdeck”,” “,” “,”884437”

“13”,”884437″,”7″,”My three RC hydrofoil craft introduction.||884437″,”It introduces the work of me current adds the latest work pegasus.
NO,1 Missile boat PG|‚O‚P of JSDMF¡
NO,2¤Boing JET FOIL 929.
NO,3¤USS PHM “PEGASUS”
The original hydrofoil control system that uses both of these all Submarged type hydrofoil boats entire small giros with making by oneself is installed.
“,”2005-08-28”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”7″

“14”,”882561″,”7″,”Gunze Sangyo ||882561″,”I have a few vintage Gunze Sangyo Super Comet Hydrofoil kits for sale if anyone is interested. They are a recent warehouse find. Sale price is $525 + shipping anywhere in the world. Payment by PayPal (we have a business account so you can use your credit card via PayPal as well) or money order. Pictures are below. I am a reputable seller specializing in RC cars and trucks. Hence, the sale of these boats which for obvious reasons do not fit in my collection.

References:
My website (with phone number) is www.InetRC.com

You can view my Ebay feedback here:
http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=toyinc.com

Most of my private collection and contact information can also be found here:
http://www.tamiyaclub.com/member.asp?id=5861

Pictures of kits for sale:

Thank you,

– Alex
“,”2005-08-24″,”Alex Oliva”,”nopswd”,” “,”Inquiries@InetRC.com”,”7″

“15”,”882560″,”7″,”Gunze Sangyo ||882560″,”I have a few vintage Gunze Sangyo Super Comet Hydrofoil kits for sale if anyone is interested. They are a recent warehouse find. Sale price is $525 + shipping anywhere in the world. Payment by PayPal (we have a business account so you can use your credit card via PayPal as well) or money order. Pictures are below. I am a reputable seller specializing in RC cars and trucks. Hence, the sale of these boats which for obvious reasons do not fit in my collection.

References:
My website (with phone number) is www.InetRC.com

You can view my Ebay feedback here:
http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=toyinc.com

Most of my private collection and contact information can also be found here:
http://www.tamiyaclub.com/member.asp?id=5861

Pictures of kits for sale:

Thank you,

– Alex
“,”2005-08-24″,”Alex Oliva”,”nopswd”,” “,”Inquiries@InetRC.com”,”7″

“16”,”880301″,”7″,”Re; introduces RC hydrofoil PEGASUS||880301″,”Snap introduction in test Sou of my RC pegasus.
It reports on the snap testing my RC pegasus hydrofoil missile boat
launch.
It is an impellent of the water jet and an image in surfacing Sou.
“,”2005-08-20”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”879209″

“17”,”880300″,”7″,”Re; introduces RC hydrofoil PEGASUS||880300″,”Snap introduction in test Sou of my RC pegasus.
It reports on the snap testing my RC pegasus hydrofoil missile boat
launch.
It is an impellent of the water jet and an image in surfacing Sou.
“,”2005-08-20”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”879209″

“18”,”879209″,”7″,”Re; introduces RC hydrofoil PEGASUS||879209″,”Thank you. !Umi
I made three hydrofoil crafts (submargide foil type) succeed in this pegasus. I do not
stop the challenge to the radio controller technology not exhausted.
This concludes my report.
“,”2005-08-18”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”879094″

“19”,”879208″,”7″,”Re; introduces RC hydrofoil PEGASUS||879208″,”Thank you. !Umi
I made three hydrofoil crafts (submargide foil type) succeed in this pegasus. I do not
stop the challenge to the radio controller technology not exhausted.
This concludes my report.
“,”2005-08-18”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”879094″

“20”,”879094″,”7″,”Re; introduces RC hydrofoil PEGASUS||879094″,”Takahashi san,
Omedeto gozaimasu.

You make this look too easy. I am currently struggling with power vs heat and running time. I believe I have the motor and pump configured. The next step for me is to water cool it and some slight foil changes. I still feel like the boat is struggling to get lift and planing speed.

“,”2005-08-18″,”Umi_Ryuzuki”,”nopswd”,” “,”umi_ryuzuki@hotmail.com”,”878596″

“21”,”878596″,”7″,”Re; introduces RC hydrofoil PEGASUS||878596″,”Thank you1. @Barney san
The development period of about one year was necessary for the modeling
of this pegasus.
My being very satisfied with result before
The pegasus who was the active service is very glad to reproduce the RC
model Sou appearance.
This concludes my report.
“,”2005-08-17”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”877873″

“22”,”877873″,”7″,”Re; introduces RC hydrofoil PEGASUS||877873″,”Fantastic… Great modeling (and photography!)”,”2005-08-16″,”Barney C Black”,”poopdeck”,” “,” “,”877240”

“23”,”877321″,”7″,”introduces RC hydrofoil PEGASUS-2||877321″,”The image of introduces RC hydrofoil PEGASUS is added.
“,”2005-08-15”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”7″

“24”,”877240″,”7″,”introduces RC hydrofoil PEGASUS||877240″,”The brave figuer of the success “PEGASUS” to the RC modeling of PHM1 again.
It introduces RC hydrofoil missile boat PHM1 “PEGASUS” of my latest work.
It is a radio controller model of hydrofoil missile boat PHM1 “PEGASUS” that had
attached to the patrol of the Caribbean sea with USS that I produced in the original
before that introduces here.
The feature of this model ship surfaces by using the hydrofoil by the same water jet
propulsion principle as the thing and starts.
Water is jetted at high speed with the micro water jet pump developed in the original,
it surfaces from the surface of the water with the hydrofoil at the reactionary speed,
and Sou ..
The stability when surfacing achieved a steady running by a small giro by the
hydrofoil automatic control theory originally developed.
1:50 main spec = scale scales of this boat
8.4V?Piezo-electric vibration giro control hydrofoil system and total length = ..820mm..
above equipped with Ni-Cd battery, balsa monocoque hull, 500 faction electric motor,
and original production water jet pump
“,”2005-08-15”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”7″

“25”,”862106″,”7″,”Sparviero update||862106″,”Not as much accomplished as Takahashi-san, but the boat runs.
I need much more speed to even get the hull to plane up and out of the water. More design work on the pump, speed and size. I hope to get it foil borne before the end of the Summer season.

“,”2005-07-17″,”Umi_Ryuzuki”,”nopswd”,” “,” “,”0”

“26”,”851276″,”7″,”scale model hysrofoil, need some advice||851276″,”Hello Divyam,

How are you going with your model in the meantime? Have you started on the hull or selected a motor yet?

If I understood your plans correctly, you will have foils at the front of the model only and the back will not be supported by a foil?

The size of motor you select will depend on the weight of the model and how fast you would like it to go. It is important to keep the weight of the model as light as possible by using light weight materials for the hull and foils. Thin plywood (preferably no more than 2mm) could be suitable and you could also consider using balsa wiid, but in that case you need to be careful to waterproof it carefully with varnish. To propel such a model, an inclined shaft driven directly from the motor is probably most easy. A typical DC electric motor used on electric race cars should be OK if your model is light enough.

If you are able to give us more details of the geometry and expected weight of your model, then that will help when you are seeking further advice. It is a good idea to use a set of kitchen scales to weigh the various parts of the model you are planning to use, for example the hull materials, motor, batteries, propeller shaft, foils, radio control receiver and servos etc. You can then get a better estimate of the expected total weight the model.

Regards

Martin”,”2005-06-26″,”Martin Grimm”,”nopswd”,” “,”seaflite@alphalink.com.au”,”0″

“27”,”848065″,”7″,”Re; Lines/Plans for PHM Pegasus?||848065″,”You can get plans for the Boeing PHMs at
http://floatingdrydock.com/
They have plan view, outboad profile, hull lines, and some detail sheets showing sections, and mechanical. The plans are in Metric and English measurements.”,”2005-06-19″,”Umi_Ryuzuki”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“28”,”843240″,”7″,”Re; Lines/Plans for PHM Pegasus?||843240″,”Hi! Markus san
Your Spabiero class model is wonderful.
It was a log of past BBS, there was writing the drawing of the PHM pegasus from Mr. Barney, and
look once, please. MsgidNO,
=790044

“,”2005-06-09”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“29”,”842581″,”7″,”Lines/Plans for PHM Pegasus?||842581″,”Dear Sirs,

I have recently built the Italian Hydrofoil Sparviero as none working
modell in 1/72nd. (see picture following).

(See attached file: Sparviero_frontsideview2.jpg)

I´d like to build next the PHM Pegasus also as none working display modell
scale 1/72nd.

Do you know where to get accurate plans / drawings including line drawings
of the hull?

Best regards

Markus Schott
Germany”,”2005-06-08″,”Markus Schott”,”nopswd”,” “,”Markus.Schott@LBBW.de”,”0″

“30”,”819370″,”7″,”Re; Re; Re; Nikko Shockwave wanted||819370″,”Hi Rod, thanks… there is no wiser voice than the voice of experience. Good advice!”,”2005-04-27″,”Barney C Black”,”poopdeck”,” “,” “,”0”

“31”,”815834″,”7″,”Re; Re; Nikko Shockwave wanted||815834″,”Be careful that u get a good one. I have 3 of them. Only 1 actually gets up on the foils and scoots. The others work ok but the motor does not seem to develop the necessary power. The one for sale on ebay now has a broken propellor. And I don’t think u can change it even if it comes with an extra. I wud be happy to sell you one of mine.”,”2005-04-19″,”Rod Clayards”,”nopswd”,” “,”rodbev@shaw.ca”,”0″

“32”,”814199″,”7″,”Re; Nikko Shockwave wanted||814199″,”There is a Nikko Shockwave up for auction on www.ebay.com right now. Search for item # 5969570866. Starting bid is 99 cents. Auction closes in 5 days. The following link will take you directly to the item listing:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2564&item=5969570866&rd=1″,”2005-04-16″,”Barney C Black”,”poopdeck”,” “,” “,”0”

“33”,”811816″,”7″,”scale model hysrofoil, need some advice||811816″,”You should definitely read through the historical correspondence in the IHS archives on models. See the following pages:
http://www.foils.org/modelrc.htm
http://www.foils.org/models.htm

Also, a number of modelers are members of IHS, so hopefully one or more of them will see your posted message and will respond to you.”,”2005-04-11″,”Barney C Black”,”poopdeck”,” “,” “,”0”

“34”,”811810″,”7″,”Re; Nikko Shockwave wanted||811810″,”I have seen them up for sale at auction on eBay from time to time. I don’t know if you are an eBay member, but if you are, you can set up an automatic search in the “My eBay” section of the website. It will execute your search every day and send you an email if it finds anything new. Your search could be: +nikko +shockwave.”,”2005-04-11″,”Barney C Black”,”poopdeck”,” “,” “,”0”

“35”,”810414″,”7″,”Nikko Shockwave wanted||810414″,”Does anyone know where I can get a Nikko Shockwave model hydrofoil? I’ve searched the web but it seems that this product is not currently available. “,”2005-04-09″,”Jason”,”nopswd”,” “,”Jasonracer33@hotmail.com”,”0″

“36”,”809683″,”7″,”scale model hysrofoil, need some advice||809683″,”Respected Sir/Madam,

I am Divyam Nagpal residing in New Delhi , India and was keen on seeking information on hydrofoils.I have developed designs of a scale model of a hysrofoil and would like some advice on it.
My design is basically based on a rigid hull with two foils on either sides and a meachanism following the principle of aerofoil in the front for lift.It would be about 200 cm in length and 15 cm wide at the centre. Firstly i would like to know what kind of motor would be suitable.Also i would like to know what material can be used as a hull.I have already obtained the R/C set and is ready to be installed.
I would be highly obliged if you could answer soon as this project is already delayed by a long time.

Regards
Divyam”,”2005-04-07″,”Divyam”,”nopswd”,” “,”divyamnagpal515@hotmail.com”,”0″

“37”,”805186″,”7″,”Robbe F-1 Skiboot||805186″,”I just happened upon a kit of the Robbe F-1 Skiboot high speed hydrofoil. Has anyone built this kit. I know it is not like most of the hydrofoil kits since it is not scale but is there any interest in this kit? I also have a model by Hydrofoils Inc. (not making models any more). Has anyone built this one either?”,”2005-03-30″,”Rick”,”nopswd”,” “,” “,”0”

“38”,”794425″,”7″,”radio controller high-speed SEStype ship||794425″,”Thank you. !@Mr. Bill White san
I am producing the radio controller model of PHM Pegasus besides this SES type
now. It introduces it with IHS again when launched.
This concludes my report.
“,”2005-03-11”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“39”,”794416″,”7″,”Re; R/C high-speed SES ship||794416″,”Thank youI. Mr. Barney.
I can be going to keep offering an interesting topic to the IHS member in the future. Please expect it in the future.
Moreover, please sometimes look at URL that treats my work. There is a possibility that a new work is recorded. The image of the aircraft and the hovercraft was up-loaded recently.
This concludes my report.
“,”2005-03-11”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“40”,”792471″,”7″,”TUCUMCARI||792471″,”Hello,

For the past 26 years I have served as a project supervisor creating museum exhibits in honor of U.S. vets and those of our allies. Some of the venues I have done work for include the USS Intrepid Sea Air Space Museum and the Museum of Polish Military Heritage in America, both in New York City. Load my name Mike Dobrzelecki into a Google Search Engine and you’ll see examples of some of my work on two continents over the years.

I saw your name & email on the IHS website and hope you can provide some help on a research project concerning the Tucumcari PGH-2.

I built the old Aurora kit when it first came out in the late 1960’s early 1970’s (?) and not too long ago picked up a derelict unpainted damaged built-up, as well as a pristine complete kit still in the original box. I even still have some parts from my original build model.

My intent is to build one ‘flying’ and one in the water with its struts and foils folded up and possibly write a good article on the Tucumcari.

I have everything available on the internet for this fascinating hydrofoil, as well as, the old Sea Clasics issue with the Tucumcari on the cover. Recently, I obtained a copy of the History Channel Mail Call episode with the world’s most famous D.I. narrating exquisite video of the this fast-fighting boat in action – great footage, BTW. I have even manage to track down some of its crew for personal interviews. Most frustratingly, the crew I talked to so far all stated that their photos went missing during moves over the years.

I am looking for more photos including details of the interior, the exterior fit on the cockpit/bridge and upper surface of the hull and an answer to what’s in the large opening aft of the .50 cals and masts/antennae. I would also like to track down some more crew and any other books or naval history magazine articles on the the Tucumcari. Any leads would be appreciated.

Mike Dobrzelecki
3040 Clayton Street
Easton PA 18045
“,”2005-03-07”,”Mike Dobrzelecki “,”members”,” “,”Michael_Dobrzelecki@fwc.com”,”0″

“41”,”791941″,”7″,”radio controller high-speed SEStype ship||791941″,”Great pictures of your model.

I got to see the full sized version about a year ago as the Vessel visited the US for joint exercises with the US Navy. It was a very impressive vessel. It was the largest Foam sandwich fiberglass ship that I have ever seen. The workmanship was supurb throughout.

Go to IHS web site at http://www.foils.org/restore.htm

Under Restoring a PHM in Missouri There is a briefing on the Norwegian Surface Effect Ship (SES) Fast Patrol Boat (FPB) KNM SKJOLD where you can download: skjold brief.pdf
to download a skjold Presentation with photos.

It was twice as efficient as any of the US Navy’s proposed new LCS.

The Model is very impressive as well. Does it have a working model RIB like the big one does?

Bill White”,”2005-03-07″,”Bill White”,”nopswd”,” “,”whitewn@speakeasy.net”,”0″

“42”,”791409″,”7″,”R/C high-speed SES ship||791409″,”This is a very interesting and sophisticated model at
http://d.hatena.ne.jp/skyex/20050112

Thank you Yoichi for posting this. Several IHS members have worked on other Advanced Marine Vehicles (AMVs) besides hydrofoils and will be interested in this!”,”2005-03-05″,”Barney C Black”,”poopdeck”,” “,”barney@alum.mit.edu”,”0″

“43”,”790044″,”7″,”PHM Model Plans||790044″,”There have been many requests for plans to model PHMs. There is an interesting auction of 1:107 scale model PHM plans on eBay, Item number: 5960815691, ending March 7. This is only a one page sheet with three views, not much detail, but a start. Description says the plans are from Morrison Repla-Tech by Robert C. Morrison. I googled that and got one hit, a posted thread. Excerpt: “REPLA-TECH INTERNATIONAL P.O.Box 461000 Cole Branch Los Angeles, CA 90046-1000 Alain Proteau now owns Repla-Tech. Good source of scale documentation on your favorite airplane. 3-view drawings and photos galore! Bob Morrison’s plans range from his own to imports. Especially good coverage of race planes. Catalog $ 2.50. More than one person has tried to phone Alan to no avail. Try a post card first before risking yer $2. 50. Keep me posted. SCALE MODEL RESEARCH is now handling the Repla-Tech collection of photos.””,”2005-03-03″,”Barney C Black”,”poopdeck”,” “,”bcblack@erols.com”,”0″

“44”,”784147″,”7″,”radio controller high-speed SEStype ship||784147″,”The third radio controller high-speed ship series bounce. Stately missile boat
Skyol launch

The radio controller model production of a high-speed ship is started and

Northern Europe Norway naval forces this time for , five ..earliness.. years.

It is the state-of-the-art, high-speed missile boat { Skyol }

With the hovercraft named SES = Sarfasefectoshipp (surface of the water effect boat)

It has the high speed and the control stability in the high Bullitt type of the

catamaran ship.

¡ It is a light hull made of composite materials and a water jet bimotored of
the gas turbine drive.

¡ Thorough Stealth shape is deeply moved by the fjord camouflage there is power
and with the hull and the feature.

¡ There is fan air intake for surfacing on the deck.
¡ Equipped with two storage missile container eight2
¡ This hull is reproduced by 1:50 scales.
800mm in the total length

2250 weight = G

Equipped with 500 faction electric and drive self-made water jet device

Niccad and lithium Polymer battery drive

>>Please ..following.. refer to URL of publishing for the article and the image
of details.

URL:http://d.hatena.ne.jp/skyex/20050112″,”2005-02-19″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“45”,”770509″,”7″,”vs8 pictures||770509″,”I am looking for any pictures of the vs8 particularly on the prop rudder area – I can not contact challenge publications to see if they had an old copy of the scale modeler magazine from july 82 which showed photos of the 32nd parallel kit”,”2005-01-25″,”David Short”,”nopswd”,” “,”davidsh@internode.on.net”,”0″

“46”,”768757″,”7″,”Re: simple hydrofoil plans?||768757″,”Here are some pages of interest:
http://www.home-taylor.freeserve.co.uk/content/experimental%20models.html
http://www.home-taylor.freeserve.co.uk/content/mk1%20hydrofoil.html
http://www.home-taylor.freeserve.co.uk/content/rapier%20page.html
http://www.foils.org/modelrc.htm
http://www.foils.org/gallery/models.htm
http://www.foils.org/popmags.htm#mod

I note that on eBay, there is a recurring offer to sell a set of CDs with model boat plans. The current notice is item #5950983858, titled SIXTY THREE Model Boat Plans on Four CD Set. One of the models is described as “Electric Hydrofoil.”
“,”2005-01-22″,”Barney C Black”,”poopdeck”,” “,”bblack11@cox.net”,”0″

“47”,”760909″,”7″,”propose simple model hydro foil||760909″,”Hi! Conor Davies san
I am a modeler of the radio controller ship of Japan.
I propose the idea of the hydrofoil craft that remodels the electric model boat marketed to you.
The hydrofoil craft is Shupramarl type with good stability. I think that it can easily make the hydrofoil craft when it is this method. However, a slight balance of the area, the angle, the impellent, and the weight of the hull of the hydrofoil is necessary for the hydrofoil craft of the model. It is necessary to make it run making it, and it adjusts, it cuts, and to try in the result. I think that it also studies the student by the process.
PS :BBS server of this is up-loaded and the image cannot be up-loaded by full!!. Therefore, please give your E-mail Address.
The image is sent to that.
This concludes my report.

“,”2005-01-08”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“48”,”760908″,”7″,”propose simple model hydro foil||760908″,”Hi! Conor Davies san
I am a modeler of the radio controller ship of Japan.
I propose the idea of the hydrofoil craft that remodels the electric model boat marketed to you.
The hydrofoil craft is Shupramarl type with good stability. I think that it can easily make the hydrofoil craft when it is this method. However, a slight balance of the area, the angle, the impellent, and the weight of the hull of the hydrofoil is necessary for the hydrofoil craft of the model. It is necessary to make it run making it, and it adjusts, it cuts, and to try in the result. I think that it also studies the student by the process.
PS :BBS server of this is up-loaded and the image cannot be up-loaded by full!!. Therefore, please give your E-mail Address.
The image is sent to that.
This concludes my report.

“,”2005-01-08”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“49”,”760904″,”7″,”propose simple model hydro foil||760904″,”Hi! Conor Davies san
I am a modeler of the radio controller ship of Japan.
I propose the idea of the hydrofoil craft that remodels the electric model boat marketed to you.
The hydrofoil craft is Shupramarl type with good stability. I think that it can easily make the hydrofoil craft when it is this method. However, a slight balance of the area, the angle, the impellent, and the weight of the hull of the hydrofoil is necessary for the hydrofoil craft of the model. It is necessary to make it run making it, and it adjusts, it cuts, and to try in the result. I think that it also studies the student by the process.
“,”2005-01-08”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“50”,”760245″,”7″,”simple hydrofoil plans?||760245″,”Hello,

I am a physics teacher in Harrogate, England. Some of my students have been asking about building a model hydrofoil boat, powered by some batteries and a small electric motor.

Our main difficulty is finding simple, understandable plans for the hydrofoil part itself, (materials to use, angles of attack, dimensions, position on hull etc.)

The boat will be fairly small and the hydrofoils will have to be simple, i.e. no moving surfaces.

Is this type of project possible? Are the hydrofoils easy to construct? Do such plans/instructions exist?

I would be grateful for any advice you can give or any websites you can point me to for information.

Ideally I would then send the students off to research further and come up with a project plan.

Thanking you in advance for any assistance.

Regards

Conor Davies”,”2005-01-06″,”Conor Davies”,”members”,” “,”conor.davies@ntlworld.com”,”0″

“51”,”755708″,”7″,”Thank you! Barney||755708″,”Thank you! Barney san. — I am very glad to put a picture on BBS with your help . The sequel of the Pegasus manufacture is also due to be reported from now on.”,”2004-12-25″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“52”,”755619″,”7″,”Photos: PHM Model in Progress||755619″,”Click the following link to see photos of this model under construction: http://www.exigent.info/PHMyoichi.pdf”,”2004-12-24″,”Barney C Black”,”poopdeck”,” “,”bcblack@erols.com”,”0″

“53”,”755397″,”7″,”Jetfoil Dimensions, Plans, Profiles||755397″,”I have posted information about Jetfoil dimensions, plans, profiles, fittings, hull access openings, etc. that may be of interest to people who want to model this vessel. The information shows differences between Model 929-100 (Hull Numbers 001 thru 0010) and 929-115 (0011 and on). Go to the following webpage to find the link: http://www.exigent.info”,”2004-12-23″,”Barney C Black”,”poopdeck”,” “,”bcblack@erols.com”,”0″

“54”,”754247″,”7″,”Local Interest in Hydrofoil/Portland, Oregon||754247″,”I am interested to form a local activity group here in Portland, Oregon.
This can be informal and maybe those people interested could meet once a month. My interests are as follows:

1) Historical Issues
2) Theoretical and computational aspects related to
hydrodynamics and hydrofoils in particular

This message was motivated by the most recent article on model development of radio controlled hydrofoil boats. In particular the one by Aimee Eng and Cliff Shaw.
Please feel free to contact me at:
dpsace21@aol.com

With regards, Axel Mainzer Koenig”,”2004-12-20″,”Axel Mainzer Koenig”,”nopswd”,” “,”dspace21@aol.com”,”0″

“55”,”753597″,”7″,”Under RC Pegasus construction||753597″,”The radio control hydrovane patrol guided missile (Pegasus) which I am building now is introduced. I think that I wants to reproduce sailing of Pegasus of an active-service time with S= 1:50 and the hull RC made from a full length =800mm balsa. It is a brave figure again !”,”2004-12-18″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“56”,”735242″,”7″,”Re: Introduction of my R/CHydrofoilsModels ||735242″,”Hello1 Wolfgang Lam san
Your mail was read.
Thank you for having my radio control jetfoil praised.
and Although I have understood your intention generally, there is a
point which is not known well yet. There is a question. Do you want to
develop an amphibious, completely new hydrofoil type radio control
automobile model like the image data of a trial product? . Or do you
want to develop the radio control scale model of the jetfoil high-speed
pure Boeing ship? . I have not done understanding which it is yet.
Please give me the reply of the above question. Above
— “,”2004-11-09”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“57”,”735236″,”7″,”Re: Introduction of my R/CHydrofoilsModels ||735236″,”Hi! Wolfgang Lam san
I to the E-mail by which it came from you put once again the contents of the reply taken out to Fri and 05 Nov 2004 repeatedly here last week.
>
Above
— “,”2004-11-09”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“58”,”735168″,”7″,”Re: Introduction of my R/CHydrofoilsModels wo||735168″,”Dear Yoichi Takahashi san

So excited receiving your message, it is so great meeting you Hydrofoil Jetfoil lovers. In our mail, you mentioned that you have replied last Saturday. I think I missed it, did you send directly to my e-mail account or post it on IHS message board ? Do you mind send it over again, are there more photos/video that you would like to share with us ?

We are a small radio toy manufacturing company and have been manufacturing such for Taiyo and Tamiya. Recently we want to develope a Hydrofoil or Jetfoil toy, of course, cost is a very important factor as our marketing sector is in toys but not hobbies that we would be excited if we can find working partners for consultation or joint venture.

If you have any suggestions, we would be delighted to hear.

Thanks and rgds,

Wolfgang Lam
“,”2004-11-09″,”Wolfgang Lam (Hong Kong)”,”nopswd”,” “,”wavecon@netvigator.com”,”0″

“59”,”734680″,”7″,”JETFOIL model||734680″,”Good evening!
. Wolfgang Lam san It is very interested in your project.
Since the mail from you was contained in my mail last weekend, although I was allowed to ask a question, has it arrived? Since there was writing when it visited the IHS board today, it is replying also by this IHS. Now, development of my RC jetfoil model took in three years. Many were repetitions of an experiment, a try, and an error. All rejection type hydrofoils are very difficult things, such as stability, maneuverability drivability, and a propultion system, so much. I was able to acquire some physical numerical values and know-how required for a design by this development. If your picture is seen, some subjects can see. Selection of a water jet system etc. needs a design and technical choosing the optimal for the area of in-its-hands wings, form, a control system, and propultion. Moreover, weight, the hydrovane for stability reservation, the size of a hull, etc. serve as a conclusive factor. The theory and the solution method of a model are a method of at a model. Above”,”2004-11-08″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“60”,”732651″,”7″,”Re: Invite modeller on Jetfoil project||732651″,”Your photos are most interesting. Take a look at the Flying DUKW on my webpage at http://www.exigent.info/FlyDUKW.pdf”,”2004-11-04″,”Barney C Black”,”poopdeck”,” “,”barney@alum.mit.edu”,”0″

“61”,”732178″,”7″,”Source of RC Hydrofoils||732178″,”I see used RC Hydrofoils come up for auction on www.ebay.com from time to time.”,”2004-11-03″,”Barney C Black”,”poopdeck”,” “,”barney@alum.mit.edu”,”0″

“62”,”732176″,”7″,”Re: Introduction of my R/CHydrofoilsModels wo||732176″,”Mr. Yoichi Takahashi san

My name is Wolfgang Lam from Hong Kong, I saw your beautiful Jetfoil model picture and your introduction, they looked brilliant.

We would like to invite you participate in our project of re-modelling an amphibian toy car to a Jetfoil using centrifugal fan for the waterjet propulsion system.

The car measures about 360 x 140 mm, estimated payload is around 1100 gm with motors, servos, battery etc.

I am attaching a photo for your quick browsing and if you are interested in know more, I can send you movie file of size about 10 MB.

Looking forward to hear you again.

Tks n Rgds”,”2004-11-03″,”Wolfgang Lam (Hong Kong)”,”nopswd”,” “,”wavecon@netvigator.com”,”0″

“63”,”732116″,”7″,”Jetfoil Hydrofoil modelling||732116″,”Hi, all Jetfoil Hydrofoil lovers We are looking for helper to re-constructing an amphibian toy car into a Jetfoil, it measures about 360 x 140 mm, estimated payload is 1100 gm with batteries, motors, servos. Attached is a slide/video clip which shows real one flying and the car standing on its struts. Thank you “,”2004-11-02″,”Wolfgang Lam (Hong Kong)”,”nopswd”,” “,”wavecon@netvigator.com”,”0″

“64”,”731709″,”7″,”Invite modeller on Jetfoil project||731709″,”Please see attached for another photo of the (ex amphibian car) for rebuilding into a Jetfoil.

Thanks.

Wolfgang Lam”,”2004-11-02″,”Wolfgang Lam (Hong Kong)”,”nopswd”,” “,”wavecon@netvigator.com”,”0″

“65”,”731698″,”7″,”Invite modeller on Jetfoil project||731698″,”Hi, Jetfoil/Hydrofoil lovers

We would like to seek a helper for building a Jetfoil model from a toy ship hull (an ex-amphibian car) using a centrifual fan as the propulsion system, the toy ship hull measures 360 x 140 mm, estimated payload with batteries, motors, servos etc is 1100 gm.

We can send you the hull, the fan, and required motor for assembling.

Please see attached photos of the ship hull with the centrifual fan and posted on its 3 struts.

Thank you”,”2004-11-02″,”Wolfgang Lam (Hong Kong)”,”wavecon”,” “,”wavecon@netvigator.com”,”0″

“66”,”722798″,”7″,”Looking for.||722798″,”Is there anyone that is selling RC Hydrofoils?”,”2004-10-13″,”Jim Myers”,”nopswd”,” “,”jrm16@zoomtown.com”,”0″

“67”,”721717″,”7″,”hydro foils for kiteboard||721717″,”I have recently competed in Weymouth speed week on a kitesurf kite and standard board and have posted a speed of 30.97 knots.
I wish to increase the speed and the only thing I believe is stopping me is the boards resistance. I wish to try out hydrfoils on my board that will lift the board approx 5-10 cm off the surface of the water. I have thoght about using hydrfoils off model boats.
The hydrofoils will have to be made of metal I think. Has anyone got any suggestions of where I could get such things from or made?
The board I am using is 130cm long and 37cm wide.
I look forward to your suggestions
Richard Gowers
Uk”,”2004-10-11″,”Rich Gowers”,”nopswd”,” “,”info@surf-skate-ride.co.uk”,”0″

“68”,”709950″,”7″,”Re: Tucumcari Model e-bay||709950″,”Here is a third Tucumcari Model.
It says a couple pieces are missing.
Item Number 5921479181

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2590&item=5921479181&rd=1″,”2004-09-16″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“69”,”708393″,”7″,”Another Tucumcari Sept 13th, 2004||708393″,”Here is another e-bay auction for one of these model kits.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=4248&item=5920973946&rd=1

or Item Number 5920973946″,”2004-09-13″,”Aimee Eng”,”nopswd”,” “,”umi_ryuzuki@hotmail.com”,”0″

“70”,”703922″,”7″,”Re: board ease of use||703922″,”Aimee

We have tried to make to make the board a little simpler to use. If we messed up and made it worse, let me know what bothers you and we can fix it.

Bill White
Moderator”,”2004-09-03″,”Bill White”,”foilsadm”,” “,”whitewn@speakeasy.net”,”0″

“71”,”703833″,”7″,”Tucumcari Model e-bay||703833″,”If anyone is interested, there is an Aurora model of the Tucumcari on e-bay.
Item number 5918286328

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2590&item=5918286328&rd=1

Aimee

(did this bbs get more difficult to access since I was last here?)”,”2004-09-03″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“72”,”694827″,”7″,”want to take lease russian hydrofoil||694827″,”Falcon sea trans company would like to lease russian built hydrofoil if u have any information please mail me as soon as possible”,”2004-08-15″,”Ruman Barua”,”nopswd”,” “,”rum27m@yahoo.com”,”0″

“73”,”689422″,”7″,”Introduction 2 my R/CHydrofoilsModels||689422″,”Konbanwa Takahashi san,

Here are the fiberglass struts after one week of work.
The Struts came out very well and I am happy with the work.

The right strut is still solid, with the foam core still in place.
The left strut has had the foam melted out with acetone.

I will reinforce the uptake with a vertical piece of styrene, This will also help keep the water running straight as it passes through the strut.

Mata aimasho,

Aimee Eng.”,”2004-08-04″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“74”,”688884″,”7″,”Introduction 2 my R/CHydrofoilsModels||688884″,”I have decided to try to fiberglass the rear struts.
Here are the foam cores fiberglassed and vacuum bagged.
“,”2004-08-03″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“75”,”684342″,”7″,”Introduction 2 my R/CHydrofoilsModels||684342″,”konbannwa! Aimee.Eng
san
. The thin aluminum board which constitutes the strike rat is pasted up by epoxy adhesion material. Since it is very difficult, aluminum welding is not used. Above”,”2004-07-25″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“76”,”683895″,”7″,”Introduction 2 my R/CHydrofoilsModels||683895″,”Konbanwa Takahashi san,

How did you assemble the aluminium plates?
Is the aluminium TIG welded or epoxied(glued) into shape?

I am Sailing boats this weekend, So no new work until next week.

Mata ne.”,”2004-07-24″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“77”,”683816″,”7″,”Introduction 2 my R/CHydrofoilsModels||683816″,”konnichiwa!. Aimee Eng san
The struts is made with the 0.3‚‚ thin aluminum board in order to serve as a waterway duct. Foil is shaving and making ramin wood to the wings type.
“,”2004-07-23”,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“78”,”683143″,”7″,”Introduction 2 my R/CHydrofoilsModels||683143″,”konbanwa Takahashi san,

The temperature is 26-32C here.
The planking is 1.5mm balsa wood. After sanding the hull lost 20 g but I am trying to smooth the hull right now so it may stay about 290g when finished. Hopefully your diagrams and pictures will keep this project from taking three years to complete.

I am not sure I understand the joint development question.
Is that you helping me develop my model? I welcome your help.
Also, I would be happy to help anyone start or build a model if it is within my means.

I am thinking that I will build the jet pump not buy one.
How did you build your struts?
Are the struts and foils balsa?
“,”2004-07-22″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“79”,”682771″,”7″,”Introduction 2 my R/CHydrofoilsModels||682771″,”CONBANWA. Aimee Eng san!

This place, intense heat continues every day, and, as for Japan, it is very hot (39-degree Centigrade). You live. How are
and the temperature at the time? . It is leaf surprise at the speed of your modeling speed! Thank you for showing a beautiful hull. Judging from a hull size, the almost same size as my hydrovane patrol guided missile is conjectured. Getting, if you say, a jet pump and a hydrovane think that they are difficult to be sure. Finishing as lightly as possible is important for a hull. Mind should attach to seldom become weight over just because it thinks a feeling of a scale as important. By the way, is the Planck wood of a hull a balsa? The jet pump spent also for me to research and development in three years. Although the jet pump for models out of which electric power comes was looked for among the world, there is anywhere, and it was made personally. [ no ] Then, although it is a proposal, how is collaborating on your on-going R/C MODELE-SUPABIERO class by two persons? Mutual favorite technology is shared and it is international joint development. If you avoid, since it may offer the technology of an electric jet pump and I will also want to have subject nature as a modeler which plays an active part internationally.
Please inquire.”,”2004-07-21″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“80”,”682646″,”7″,”Re; RHS 160 F- Foil Arrangement||682646″,”Well apparently there are some file limits for accounts so if you need a larger file of the RHS140 plans e-mail me, and I will send you the best copy I have.

Also, I have not extrapolated any frame/station drawings for the 140 series yet, so that information is not available at this time.”,”2004-07-21″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“81”,”682641″,”7″,”Re; RHS 160 F- Foil Arrangement||682641″,”How about an RHS 140
(Courtesy of Martin Grimm)

Perhaps you can modify the superstructure, length and beam to match the RHS 160″,”2004-07-21″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“82”,”682329″,”7″,”Introduction 2 my R/CHydrofoilsModels||682329″,”Ohaiyo Takahashi san,

Building a boat hull is the easy part. (Boat hull wa muzukashii ku nai.)
Building the jet pump and foils will be difficult. I would like to make this electric powered. Any assistance will be greatly appreciated. (Jet pump to foils wa taskete onegaishimasu.)

The Sparveiro class is
Length x width x draught
23m x 7m x 1.5m

The model is
637mm x 185mm x 40mm
Currently the rough fiberglass hull weighs 288.5g
I will sand it and finish the hull today.

Aimee Eng

Here is todays hull image
“,”2004-07-20″,”Aimee Eng”,”nopswd”,” “,”Umi_Ryuzuki@hotmail.com”,”0″

“83”,”682268″,”7″,”Introduction 2 my R/CHydrofoilsModels||682268″,”CONBANWA! Aimee ENG san

Thank you for having the picture of your spa BIERO class shown. By the way, is the speed of your work very Quicly? . Would you teach the size of the scale of a hull, and the full length of an actual ship, if it avoids? Is it engine? Is it an electric motor drive? . Above”,”2004-07-20″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

“84”,”682267″,”7″,”Introduction 2 my R/CHydrofoilsModels||682267″,”CONBANWA! Aimee ENG san

Thank you for having the picture of your spa BIERO class shown. By the way, is the speed of your work very Quicly? . Would you teach the size of the scale of a hull, and the full length of an actual ship, if it avoids? Is it engine? Is it an electric motor drive? . Above”,”2004-07-20″,”yoichi takahashi “,”nopswd”,” “,”skyex@triton.ocn.ne.jp”,”0″

 

2004

 

 

Archive; Model Kits, TUCUMCARI/Others

Click below to Open

http://www.foils.org/models.htm
[Date/Time=03-24-2002 – 3:15 PM]

Name:webmaster@foils.org [Msgid=237685]
Archive; Radio-Controlled Hydrofoil Models
Click below to Open

http://www.foils.org/modelrc.htm
[Date/Time=03-24-2002 – 3:22 PM]

Name:webmaster@foils.org [Msgid=237690]
Flying Keelboat

      • microSAIL! (

www.microsail.com

      • ) ia about to introduce a revolutionary RC sailing model: the aeroSKIFF. This boat is the first production model sailboat to be offered with a canting keel which is very fast: 0 to 52 degrees in one second. Most revolutionary of all is that the boat is also available with hydrofoils(!): one on the daggerboard just ahead of the canting keel strut and one on the rudder(thats right–only two!). She uses a variation of Dr. Sam Bradfieds altitude control system. So far as we know the aeroSKIFF is the FIRST BALLASTED KEELBOAT–either model or fullsize to fly on fully submerged foils(or any other kind of foils). We are pursuing a patented version of this model technology for use on full size boats like Open 60’s…
      • If you have ever heard of or seen –and can substantiate it-another keelboat on foils please contact Doug Lord at:

lorsail@webtv.net

      • The aeroSkiff pictures will be posted on our website in a month or so…

[Date/Time=04-21-2002 – 12:56 PM]

Name:Doug Lord lorsail@webtv.net, [Msgid=249867]
PHM Radio Controlled Model

ViewThread

      • For those interested in the model of the

USS AQUILA

      • (PHM-4) by Ronald Swart, Look at:

http://home.wanadoo.nl/~hydrofoils1/phm.htm

      • .
      • When more info shows up, I will make a update.


[Date/Time=05-12-2002 – 7:56 AM]

Name:Mark van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=258425]
PHM Radio Controlled Model

      • Additional photos provided to IHS by Mark




[Date/Time=05-22-2002 – 9:02 PM]

Name:Barney C. Black webmaster@foils.org, [Msgid=262735]
Test Rig for R/C Model CURL CURL

ViewThread

      • See the image of my model R/C hydrofoil with a ‘test rig’ catamaran owned by a friend of mine (pictured). Actually, the catamaran has been used for solar boat races in recent years but is ideal for towing models. The idea was that this could be used to do experimental tests of transverse stability of the model while foilborne on a calm day. We just have not got far enough with the idea yet! Far more ideal of course would be to perform the tests in a towing tank! — Martin Grimm (

seaflite@alphalink.com.au

      • )


[Date/Time=05-27-2002 – 6:35 PM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=264347]
Wing In Ground Effect Models

      • Wing In Ground Effect Models
      • Dear W.I.G enthusiast
      • This is just a note to tell you that I have added some more photos of WhizzyWig models to my web site, which you might like to see.
      • Visit :

http://www.home-taylor.freeserve.co.uk/index%20ekranoplan%20man.html

      • or go direct to the WhizzyWig Gallery :

http://www.home-taylor.freeserve.co.uk/whizzywig1/whizzywig%20gallery.html

      • to see the pictures.
      • Also a new video clip of the prototype WhizzyWig XGE, flying in XGE mode (eXtreme Ground Effect) has been added to the Video section of The Wig Page, visit:

http://www.se-technology.com/wig/

      • If you would like a set of plans to build your own WhizzyWig model see the details at :

http://www.home-taylor.freeserve.co.uk/whizzywig1/whizzywig%20plans.html

      • , or email me and ask for an order form for the WhizzyWig XGE Plans Pack.
      • I hope you enjoy the photo.

      • Regards
      • Graham Taylor

home.taylor@virgin.net

      • Date=2002-05-29 for Graham Taylor

[Date/Time=05-31-2002 – 1:29 PM]

Name:Graham Taylor home.taylor@virgin.net, [Msgid=265985]
How Small Can You Go?

ViewThread

      • Is it possible to make a working foil less than 10mm from leading edge to trailing edge that would be suitable for a small saing model say <40cm long overall? If it is possible what would be the best cross section and angle of the foil and would a T foil configuration work at this size? Also to make it at all effective how light would the model have to be?

[Date/Time=07-12-2002 – 4:25 PM]

Name:Matthew Lingley matthew_lingley@hotmail.com, [Msgid=281832]
How Small Can You Go?

      • Matthew,
      • I think it would be possible to build a sailing hydrofoil model of only around 40cm long and with hydrofoil chord lengths of less than 10mm, but you would have to take a lot of care to make it work, especially to keep its weight down to the bare minimum. I can’t imaging anyone else would have made such a small sailing hydrofoil before.
      • A more workable size for a sailing model would be like the MicroSail F3 (see:

www.microsail.com

      • ) which is 1.4 metres (55.75 inches) long. Building to that scale means shaping and assembling the components doesn’t become so fiddly.
      • If you were to attempt a 40cm long model of a similar arrangement to the F3, then the weight budget you have to work with can be estimated by scaling down from particulars of the F3 model. This model has a weight of up to 8.2 lb or 3.7 kg. If you try to build a model only 28% of the size of the F3, then its weight would have to be about 86 grams!
      • An inverted T foil system as on the F3 required foil control to regulate the angle of attack of its foils. The weight of such control linkages alone would cause problems. As such, for a small sailing hydrofoil you would be far better off using surface piercing hydrofoils that don’t require foil angle control (explore our website for more details of the differences between folly submerged and surface piercing hydrofoil types).
      • Furthermore, the model would have to be free sailing as even the lightest radio control equipment would make it too heavy.
      • A final aspect to consider: As boats become smaller, the frictional resistance coefficient of their hulls (or foils) becomes higher. This means that although they have less wetted surface area that is subject to friction, they still suffer from a relatively larger amount of resistance in proportion to their weight.
      • Although a smaller model may seem more manageable to build, in this case you would be better off adopting a larger model as there is a better chance you will be able to make it work well.
      • I don’t have any good tips to offer you about the best foil cross section and angle except that the best lift to drag ratio of most aerofoils and hydrofoils is achieved at a relatively small angle of attack (around 3-4 degrees?) and you should be aiming for that angle.
      • I wish you well with your hydrofoil modelling.

[Date/Time=07-13-2002 – 3:36 AM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=281949]
Thunderstreak Collection

ViewThread

      • I visited your site, and was surprised to see a reference to the old ThunderStreak model on your page at

http://www.foils.org/gallery/models.htm

      • ! I thought you might get a kick out of my collection.


[Date/Time=07-25-2002 – 5:13 AM]

Name:Mark dcpmark@adelphia.net, [Msgid=286201]
Thunderstreak Collection

      • Mark
      • thanks for the great photo
      • Bill White

[Date/Time=07-27-2002 – 5:04 PM]

Name:bill white whitewn@speakeasy.net, [Msgid=287225]
PHM model up for sale!!

ViewThread

      • Announcement!!!
      • A friend of my is selling his PHM model.

http://home.wanadoo.nl/~hydrofoils1/phm.htm

      • This is a Radio Controlled model of the USS Aquilla.
      • The buyer will not get the model only,but also the mould to make a new PHM hull.
      • And a lot of information.(photo’s drawing enz..)
      • The model is build according to the original drawings of the Boeing company.
      • In a scale of 1:30,
      • this makes her length 135 cm,
      • beam 48 cm,
      • and the weight is 14 kg.
      • Hull is made of kevlar,deck,deckhouse and foils are made of aluminium.
      • Need some detail work.
      • Asking price is $3000,- USD,
      • That is for:
      • Model,mould,photobook,drawings and shipping.


[Date/Time=08-07-2002 – 4:26 PM]

Name:Capt Mark van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=292219]
Attached File  “afullside~JPG.zip” – size 26604   Click Here To Download
PHM model up for sale!!

      • WoW! I’ve contacted the owners (and perspective owners) of the remaining PHM’s. Ever thought about “Super Sizing” and buying one of the originals….?

[Date/Time=08-10-2002 – 12:41 AM]

Name:Dan Schmidt gse2schmidt@hotmail.com, [Msgid=293848]
Test Rig for R/C Model CURL CURL

      • I recent received an e-mail enquiry seeking more details about the ?test rig? boat and whether it could be used for model testing work.
      • The photo in the original posted message on this subject was taken earlier this year and is the only time we have attempted to tow the hydrofoil model using the catamaran so far. It was really just an idea prompted by the fact that it is difficult to gain access to towing tank facilities (though the hydrofoil model in the photo has been tested in the towing tank at the Australian Maritime College in Launceston as a research activity some years ago).
      • The idea of using a boat as a means to test scale models for assessment of their performance is not a new one. I have video footage that shows that a Volga sports hydrofoil (see the website for details of this craft type) was once used by Rostislav Evgenievich Alekseev (again, see website for more info) and the Central Hydrofoil Design Bureau in the former Soviet Union to test the characteristics of Wing-in-Ground-Effect craft (Ekranoplans) using small scale models. In that case, the model was simply towed from a bar projecting out from the side of this small 6 seater hydrofoil and was towed via a thin towline. These tests were probably conducted to examine flight stability and other such issues. A more dedicated self-propelled model test platform was designed by the Gdansk Ship Research Institute in Poland and is described in the 1974-75 issue of Jane’s Surface Skimmers. This was known as the Badacz II and was of a hydrofoil supported catamaran configuration with the towing rig installed at the bow. It was apparently used for testing of hydrofoil and hovercraft models. Taking the idea to extremes, Boeing used the hydroplane ‘Aqua-Jet’ to test hydrofoil models at high speed, reportedly up to 100 knots. I am also aware that a consulting naval architect in Australia has used a larger boat for testing of scale models of conventional vessels and others have probably also done so.
      • Our catamaran called ?Ampcat? is not highly instrumented. On the occasion of the trial run towing the hydrofoil model, we had a small hand held GPS unit on board. It could measure speed over ground fairly well (but how accurately, I can’t say). We had also fitted a very basic Pitot tube that was roughly marked off with speeds in half-knot increments. The instrument was simply manufactured from a length of Perspex tube heated and bent into an L shape with the lower opening facing forward into the oncoming water flow and the upper end open to atmospheric pressure. The stagnation pressure at the front of the tube results in a column of water within the Pitot tube, which rises above the mean water level. This in theory should measure speed through the water but again; I can’t say how accurate it is in practice. The towing force could be measured using a simple spring balance (more tension in the tow line results in extension of a spring) combined with a calibrated scale to make it possible to read off the tow force. This is a simple visual scale and naturally if the boat and model are not in calm water, the tension will fluctuate and readings will be difficult to record. The intention was to mount a video camera near the model to record pitch or roll motions if the tests are conducted in waves. The approach was to do everything on a shoestring budget as this is only a personal interest rather than a commercial enterprise.
      • Ampcat can comfortably reach 6.5 knots via a battery powered electric outboard motor. If it is towing a 1:20 scale model as in the photo, that speed corresponds to a full scale speed of the hydrofoil of about 29 knots based on Froude Number.
      • Testing of scale models of ships and boats to estimating resistance of the full scale vessel is established practice in the maritime industry, however you need to be quite familiar with scaling techniques and extrapolation methods to reliably predict the full-scale performance. That is even more complicated in the case of a hydrofoil than a conventional vessel. Designers, including in the hydrofoil business, have been ‘burned’ by not getting their model scaling techniques quite right. There are no shortages of craft that have under-performed on full-scale trials despite what the model tests may have indicated.

[Date/Time=08-11-2002 – 6:18 AM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=294217]
PHM model up for sale!!

      • I am interested in seeing a built model — not buying one. Anyone have one living on the eastern portion of USA?

[Date/Time=08-11-2002 – 7:32 PM]

Name:Gerry Levine gerrymega@aol.com, [Msgid=294364]
PT-50 Model

ViewThread

      • I am Japanese, and I am a fan of hydrofoil boats in Japan inland sea. I made a model of hydrofoil boat PT-50.


[Date/Time=08-18-2002 – 1:08 PM]

Name:Katsuhiro Sakai ksakai@orange.ocn.ne.jp, [Msgid=297592]
PT-50 Model

      • Katsuhiro
      • The detail of the model is impresive. It is very hard to tell from your enclosed pictures that we are looking at a scale model.
      • Congratuations on your fine workmanship.
      • Bill white

[Date/Time=08-18-2002 – 10:12 PM]

Name:Bill White whitewn@speakeasy.net, [Msgid=297759]
PHM model up for sale!!

      • Why do you ask about owning a model in northeastern US?

[Date/Time=08-18-2002 – 11:30 PM]

Name:Dan Schmidt GSE2Schmidt@hotmail.com, [Msgid=297791]
Bras D`Or Model Question

ViewThread

      • I am a master seaman instructor at the fleet school in Victoria, BC.
      • I belong to a Radio Control boat club and am looking for a little
      • information or pictures on Bras D’Or. I wanted to know if there are rudders on the aft stabilizers, or is the ship steered by just the front foil? I have just completed a four foot CPF with working lights and radars. I have been told by numerous persons that the FHE 400 could not be made to work. I hope that you can help me out.

[Date/Time=08-20-2002 – 4:45 AM]

Name:C.T. Thomas Thomas.CT@forces.ca, [Msgid=298311]
Bras D`Or Model Question

      • The IHS has a large Section on the Bras D`Or at

http://www.foils.org/brasdorp.htm

      • It indicates that the bow foil was used for foilborne and hullborne steering.
      • The The Defence R&D Canada – Atlantic’s mandate is to conduct research and development in Underwater Sensing and Countermeasures, Naval Command and Control, Air Platforms, Naval Platforms etc. They did trails on the Bras D`Or in the 60’s and 70’s. There is some information on their web site in the History section.

http://www.atlantic.drdc-rddc.gc.ca/history/achievements_e.html

      • See also: Back to the Canadian Navy – Postwar Fleet

http://www.hazegray.org/navhist/canada/postwar/brasdor/

      • Also: If you go to IHS main home page and use the IHS Site search engine you will come up with 14 items addressing Bras D`Or both technical and historical.
      • Hope this helps.
      • Bill White

[Date/Time=08-21-2002 – 9:45 AM]

Name:Bill White whitewn@speakeasy.net, [Msgid=298902]
Bras D`Or Model Question

      • Following up on what Bill has already said, the whole bow foil assembly rotated about a vertical stock similar to a rudder stock. This was supported within a Teflon coated spherical bearing near the keel. This arrangement allowed the bow foil incidence angle to be adjusted by a hydraulic ram positioned just below the weather deck in the bow area. A steering actuator was positioned at the level of the spherical bearing with the control linkage projecting out of the Port side of the hull below the hullborne waterline.
      • To help with building a model, the book “The Flying 400” by Thomas G. Lynch would be very useful to you. This has many good photos and diagrams. Full details are available on the IHS website “Popular Books on Hydrofoils” page. Of course you could also visit the real thing on display in Quebec to see all the details first hand!
      • All the best with the modelling project.

[Date/Time=08-22-2002 – 9:48 AM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=299478]
Looking for RC Coke Hydrofoil

ViewThread

      • I am looking for the RC Coca-Cola Hydrofoil that was made in Japan. I can’t seem to find them anywhere. I believe they were made back in the ealy 90’s. They were not sold in US. Can anyone help?? Will pay a finders fee of $200 if someone can locate one for me to buy. Thanks.

[Date/Time=08-28-2002 – 6:26 PM]

Name:Barry Miller barry@mindspring.com, [Msgid=302505]
Looking for RC Coke Hydrofoil

      • I had not heard of these models, but I will post your message in our announcements page to give you a second shot at connecting with someone. If you have a photo or sketch of this model, we would like to have it for our photo gallery.

[Date/Time=09-04-2002 – 8:58 AM]

Name:Barney C Black webmaster@foils.org, [Msgid=305241]
PT-50 and PT-20 Models (Manly)

ViewThread

      • There are detailed plans of the PT 50 Hydrofoils in the State Archives at Kingswood NSW.
      • I built a 1:25 scale static model of the Manly II PT 20 Hydrofoil (see below). I have the complete plans of both the Japanese version & my version. I also have full plans of the Hydrofoil “Fairlight”.
      • I would love to build scale models of both the Dee Why & Curl Curl Hydrofoils.


[Date/Time=09-14-2002 – 7:42 PM]

Name:Alex lord_barrington@smartchat.net.au, [Msgid=309777]
PT-50 and PT-20 Models (Manly)

      • When the Sydney hydrofoils were decommissioned by the State Transit Authority I made enquiries at their Balmain workshops about whether surplus plans could be made available, even if just to copy. I didn’t have success at the time, though there was a hint that they would at least not just ‘ditch’ the information. I am pleased to hear that at least the PT 50 hydrofoil plans are available in the state archives and some day I may obtain a copy for my own information. I wonder whether the same applies for the PT 20, RHS 140 or RHS 60F types and the alternative variant of the PT 50 (since some had the raised wheelhouse arrangement).
      • The Japanese (Hitachi) had a variety of superstructure configurations for the PT 20s they built under license to Supramar. For Manly they incorporated the panoramic windows. Others were built with ‘standard’ windows throughout. For other variants there was a small exterior area for use by a limited number of passengers behind the wheelhouse.
      • The plans I prepared for my ‘Curl Curl’ model were based on fairly small scale published arrangement drawings of the type, suitably modified to reflect the peculiarities of the superstructure of ‘Curl Curl’ itself. These plans were further refined by reference to a collection of photos I had taken of ‘Curl Curl’. I have never properly completed the plans for use by others, as in fact I have many loose templates and sketches of details from which I also worked. My intention was always to finish off those plans as a basis from which others could have an easier start into building a hydrofoil model. One day I would like to put in the time to finish the drawing work.
      • Of course, I would also be keen for someone to take on a project to model ‘Dee Why’ or ‘Palm Beach’ since I am unaware of anyone who has taken on those as model subjects (both these two had the raised wheelhouse similar to ‘Curl Curl’ but instead were PT 50s). I am sorry to say I have fewer photos or postcards of those two hydrofoils (none of my own), let alone drawings of that version. You could however adapt the ‘Fairlight’ drawings you have managed to obtain (presumably from the state archives?) with the help of any photos you can get.

[Date/Time=09-14-2002 – 7:49 PM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=309781]
PT-50 and PT-20 Models (Manly)

      • Hello,
      • I am a Hong Kong people.
      • I was interseting in this model for few years.
      • I have to plan for build it,but here have not enough information for build it ,also I not have quility to build it.
      • I want to ask you that will you sell it ?

[Date/Time=09-22-2002 – 4:08 PM]

Name:Anthony Choi chixkei@netvigator.com, [Msgid=313028]
PT-50 and PT-20 Models (Manly)

      • Hello,
      • I am a Hong Kong people.
      • I was interseting in this model for few years.
      • I have to plan for build it,but here have not enough information for build it ,also I not have quility to build it.
      • I want to ask you that will you sell it ?

[Date/Time=09-22-2002 – 4:09 PM]

Name:Anthony Choi chixkei@netvigator.com, [Msgid=313029]
PT-50 and PT-20 Models (Manly)

      • Hello,
      • I am a Hong Kong people.
      • I was interseting in this model for few years.
      • I have to plan for build it,but here have not enough information for build it ,also I not have quility to build it.
      • I want to ask you that will you sell it ?

[Date/Time=09-22-2002 – 4:12 PM]

Name:Anthony Choi chixkei@netvigator.com, [Msgid=313030]
About PT-50 model

ViewThread

      • Now I am looking for a model of PT-50 Hyfrofoil.It is made in Japan model company which call Gunze Sangyo.If anyone can locate me to buy the model or directly sell to me .I can give a higher price for you.
      • P.s.If anyone can find it ,please send a e-mail to me.
      • Thanks.

[Date/Time=10-12-2002 – 8:38 AM]

Name:Antony Choi chixkei@netvigator.com, [Msgid=322522]
About PT-50 model

      • Try eBay. It is amazing how many out of production model kits can be found there.

[Date/Time=10-13-2002 – 11:18 AM]

Name:Greg Bender glbender@erols.com, [Msgid=322911]
PHM / Jetfoil Model Plans

      • I’m the person with the Jetfoil mouldings, of HMS Speedy 929-320 and the commercial 929-115-100. I’ve been working on the jetfoil model for many years, and I will soon be able to have a model fully working with ACS (My models of Jetfoil and PHM are 4ft / 1.2 m long).
      • I worked with Martin Seymour on his model back in 1985. Jetfoil or PHM require the same type of system for automatic control. I have now sourced the outlets for Jetfoil control and hope soon to be testing. Back in 1985, there was a lack of knowledge of the systems for control, but these systems are now available. I expect to have some positive news in the spring of 2003 so watch this space. Also available will be mouldings for PT50, PT75, RHS 150/160/200 + PHM, complete and ready to run.
      • I can confirm that I have all of the workshop manuals of Boeing Jetfoil and drawings. The ACS has been in my blood for years, and I have had a major breakthrough in the past few days.
      • I am able to give advice on all aspects of Jetfoil and PHM for modeling.

[Date/Time=11-02-2002 – 12:03 PM]

Name:Peter Cahill struts@talk21.com, [Msgid=332437]
Microsail Link

ViewThread

      • Was surfing your web site and thought your photos were excellent.
      • I sail radio controlled 12 Meter yachts in Orlando Florida. A friend and designer who lives here has developed and produced a Tri-Foiler which would be a good thing to add to your collection and web site.
      • Take a look at

http://www.microsail.com
[Date/Time=11-22-2002 – 5:14 AM]

Name:Tim Hopkins talltim@cfl.rr.com, [Msgid=341790]
Microsail Link

      • Thanks Tim
      • We appreciate the information and will add information of our links to other sites on our IHS Web pages. It looks pretty impressive.
      • Bill White

[Date/Time=11-23-2002 – 6:41 PM]

Name:Bill White whitewn@flash.net, [Msgid=342527]
600mm hydrofoil

ViewThread

      • I’m a 23 year old sailmaker at North Sails New Zealand. I have been sailing for 18 years. I have been sailing IOM’s for a couple of years. I’m interested in building a 600mm hydrofoil. I know this seems small but there is a competition at work. The rules 600mm max length, 1050mm from top of the rig to bottom of the keel, and it must be a monohull. I have been searching the internet for information about hydrofoils, I’m interested in finding out more about altitude control system but am finding it hard to find something. Are there any tips, hints or anything that would be helpful?

[Date/Time=01-29-2003 – 9:34 PM]

Name:Scott Beavis sjbeavis@hotmail.com, [Msgid=369322]
Re; 600mm hydrofoil

      • You should also browse through our email archives on the following page:

http://www.foils.org/modelrc.htm

      • . In particular you may be interested in two postings entitled “Modelbuilding Scaling Lessons Learned”, one by Martin Grimm, the other by Ernst Zemann ( you will have to scroll down a bit to find these as they date back to December 2000.
      • Good luck with your project, and by all means send us some photos and text for our newsletter when you are done.

[Date/Time=01-29-2003 – 9:36 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=369323]
Re; 600mm hydrofoil

      • You might want to go to:

www.rcmultihulls.com

      • the site for the multiONE(One Meter) website. I know you’re talking about a monohull but there is good info on foils on that site.
      • So far no one has succesfully sailed a hydrofoil monohull KEELBOAT though I am right on the verge of doing so with a boat called “aeroSKIFF”. It has a canting keel for stability and features a mainfoil on the daggerboard and a foil on the rudder–two foils total.(also see:

www.monofoiler.com

      • for full size monohulls(without ballast keels) on foils.
      • Another project almost ready for testing is our “microMOTH(working name) that consists of a lightweight narrow 36″ by 4″ main hull and, again, a foil on the daggerboard and one on the rudder and NO ballast keel! For stability this boat uses a 28” wide “rack” with buoyancy pods on the ends to support the boat at rest. There is a debate as to whether it is a monohull or not but I say it is since the buoyancy pods do NOT support the boat when it is sailing.For sailing stabiity up to 3lb is moved across the rack very quickly…
      • Very basic parameters that I know work are: around 50-60 sq. inches of sail for each square inch of main foil area; above a 150 sq.in.of sail per lb. of model displacement. Rudder foil about 1/2 area of main foil; mainfoil +2.5 degrees, rudder foil zero. Altitude control on my first models is MANUAL using a flap on the main foil; the ONE Meter site I mentioned has a description of a version of Dr. Sam Bradfields altitude control system I used (with permission) on the F3 hydrofoil model.
      • Good luck and keep us informed! You can contact me directly at:

lorsail@webtv.net

      • if you’d like.

[Date/Time=01-30-2003 – 8:47 AM]

Name:Doug Lord lorsail@webtv.net, [Msgid=369498]
Re; Re; 600mm hydrofoil

      • Further to the message that Barney had sent you, it would also be worth your while looking at the MicroFoiler F3 model at the MicroSail! website:

http://www.microsail.com

      • This 1.4m model trimaran hydrofoil was developed by Doug Lord with the help of Sam Bradfield. The concept could possibly be further scaled down to 600mm and adapted to a monohull arrangement with a cross beam to support the forward pair of foils, if that is permitted. It may however be more practical to adopt surface piercing foils as on the full scale French l’hydroptere (see:

http://perso.wanadoo.fr/terrasse.web/hydroptere800.html

      • ) as these are self stabilizing and so would not need the tiny height sensor wands that you would require with a scaled-down version of a fully-submerged foil design such as the F3.

[Date/Time=02-02-2003 – 11:45 AM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=371006]
12 Inch Radio Controlled Hydrofoil

ViewThread

      • This 12-inches in length hydrofoil model was given to me in the early 1960s when I was about 14 years old. The mini hydrofoil was a Vacuum-form hull with plastic foils. The boat was intended to be driven by a simple motor and 2 cells. That was about the time when the James Bond 007

Thunderball

      • film was first shown. The same type of hydrofoil flew in the movie.
      • At that time no radio-control equipment or rechargeable cells of such small size were available yet. On one occassion I was amazed to see another boy free-run the same boat with 8 AA cells flying.
      • I kept this boat as it was for another 30 years before getting around to adding R/C capability. I do not remember which might be the manufacturing company but I am sure it was a Japanese one, and it might be the Model Craft Clipper Co.
      • In the 1990s, I was having fun with mini 1/24 Tamiya cars and later 1/200 Mini-japanese destroyers, radio-controlled of course. One day the childhood dream of making the mini-hydrofoil flies came back, so I started working.
      • First I reinforced the PVC hull with a very thin layer of glass-epoxy. Hull,deck, and cabin were assembled with the boat opened from the canopy of the cabin so as to give the boat 15mm more critical side-wall. Radio-control gears were mounted in the rear section of hull, which was made completely water-proof. A Tamaya black-180 mini motor was soldered to the shaft-tube and geared to the shaft running a KNK 27mm plactic 2-blade propeller. The boat took six 270mah or six 500mah (short-type) cells. The foil was redesigned with adjustable collet soldered first to a thin copper plate then glued to the plastic foil with AA glue. The rudder sat left away from the propeller wash.
      • Today, the boat has been untouched since 1996, and there is still one problem to solve – to make it turn left.


[Date/Time=02-02-2003 – 1:03 PM]

Name:Peter Cheung cckkww@hotmail.com, [Msgid=371040]
Re; 12 Inch Radio Controlled Hydrofoil

      • Thanks for the photos… I especially like your model test basin. It is not quite as fully featured as the model basin at David Taylor Research Lab, but it does the job, and the price is cheap!

[Date/Time=02-02-2003 – 1:08 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=371043]
Re; 12 Inch Radio Controlled Hydrofoil

      • Very cool model. I would love to see it run. It’s hard to tell from the low quality pictures, does the model have a rudder, or any kind of steering gear? You said you can’t get it to turn left. What appears to happen when you try?
      • Thanks for sharing, Scott Smith

[Date/Time=02-04-2003 – 7:05 AM]

Name:Scott Smith ssmith@syntheon.com, [Msgid=371915]
See and Hear it Run

      • You can now see (and hear) it run. Peter Cheung kindly provided two video clips of his model in action. These clips are in *.mpg format; each is approx. 1 meg in file size and lasts for 6 seconds.
      • Clip #1:

http://www.foils.org/cheung1.mpg

      • Clip #2:

http://www.foils.org/cheung2.mpg
[Date/Time=02-07-2003 – 8:07 PM]

Name:Barney C. Black webmaster@foils.org, [Msgid=374282]
Buyer (and Seller) Beware

ViewThread

      • Some of the commercially produced hydrofoil RC model kits have been long discontinued and are now quite rare and valuable. Recently, several people who posted messages here were contacted directly by email with an offer to sell a rare such model at a price in the hundreds of dollars. The individual making this offer was not a member of IHS and is not known to us. The offer may be perfectly legitimate. The price may be perfectly fair… IHS has no way of knowing, and we do not recommend or endorse products and services. This seems a good opportunity to remind our valued members and correspondents to be wary of responding to any unsolicited offer to sell valuable merchandise by e-mail. If, due to distance or other reason, you have no way to meet the seller under safe circumstances and see the merchandise before you buy, then you would be ill advised to provide personal information, give out your credit card number, or mail a payment in the hundreds of dollars in such a situation. For the legitimate seller with a valuable model or other item to sell who does not have an established internet business, I would recommend that you sell the item locally where people can view the item in a safe public location before buying. Or you can list your item for sale on eBay or other web-based auction site and earn the confidence of your potential buyers by offering to deal through the payment escrow feature offered on such sites. As the saying goes, “Let the Buyer Beware!” The legitimate seller should heed this warning also, and sell by a safe means… you do not want to get a bad check or a stolen credit card number in return for your valuable model!

[Date/Time=02-17-2003 – 7:18 AM]

Name:Barney C. Black webmaster@foils.org, [Msgid=379512]
plese hepl with hydro

ViewThread

      • hi, friends, im looking for help to find cad or paper panes of hydro named Miss Budweiser, i need for made an 1/8 rc model, can anyone help me??? i heve been looking for more than 1 month but nothing, please send me mail at

armadillo@teleline.es

      • we have an modelmakers building, prototipes, enginner, etc if any one need our services, contact or visit my web page

www.galeon.com/armadillo

      • best regards
      • fernando palacio

[Date/Time=02-25-2003 – 5:48 AM]

Name:fernando palacio edreira armadillo@teleline.es, [Msgid=384434]
Re; Buyer (and Seller) Beware

      • thanks , you are rigth, i surf the web and find many photos of this hydro, and several details, now im draving cad plans to my model,wil be post here the result when finish, a lot of work, but really enjoy them, regards from spain.
      • fernando palacio

[Date/Time=02-26-2003 – 4:56 PM]

Name:fernando palacio edreira armadillo@teleline.es, [Msgid=385462]
MISS BUDWEISER RC Model Plans

      • I have not heard of anyone offering plans, but I can see why you want to build your own. The commercially manufactured R/C model of

MISS BUDWEISER

      • is quite expensive. One just sold on eBay (item # 3116608353) for USD276.00. Here is the description taken from the eBay listing:
      • “Miss Budweiser style hydrofoil remote control boat, 42 inches long, 14 inches wide with K&B 7.5cc outboard and all accessories. Radio is a Futuba Magnum Sport FP-T2PB with a 75.690 chip set, receiver is a Futuba FP-R112JE 2 channel with a futuba FP-S148 indirect drive servo and a system 2000 1/4 scale TS-72 servo. Also included is the starter and spare leg housing and prop . Great summer hobby , I haven’t run this machine but was told it will do over 50 MPH on smooth water!!”


[Date/Time=02-26-2003 – 8:02 PM]

Name:Barney C. Black webmaster@foils.org, [Msgid=385555]
PT 50 Found

ViewThread

      • I thought I’d write just to let you know that after 22 years of searching ( and 3 years since posting my original email on IHS) I have finally managed to find a Super Comet PT50 model. I was approached by email in response to my posting here, and I took a risk – after 22 years I thought it was worth it, and the model arrived today. It was found in a model shop in Italy, and it looks as though all of the parts are there including the assembly instructions and decals. I’ll post some pictures when completed – hopefully in a month or so. Thanks for your help in finding the model.

[Date/Time=02-26-2003 – 8:19 PM]

Name:Nick James ncjames2@cwgsy.net, [Msgid=385567]
Re; plese hepl with hydro

      • Dear Fernando,
      • The IHS is the International Hydrofoil Society. Miss Budwieser is a hydroplane. Hydroplanes are a form of racing boats sponsored by the American Power Boat Association. I would suggest you look at their web pages. I suspect obtaining drawings would be difficult since these racing teams do not want to disclose any of their secrets to maintain an edge on their competitors.
      • S. Arima, IHS member

[Date/Time=03-01-2003 – 10:07 PM]

Name:S. Arima ihs@foils.org, [Msgid=387384]
Re; About PT-50 model

      • Dear Mr.Anthony CHOI,
      • Are you still serious of buying PT50 model hydrofoil which was manufactured by Gunze Sangyo? I have one untouched still in box.
      • Yours Sincerely,
      • Peter CHEUNG
      • 4th March,2003

[Date/Time=03-04-2003 – 9:47 AM]

Name:Peter CHEUNG cckkww@hotmail.com, [Msgid=388816]
Re; Re; About PT-50 model

ViewThread

      • yes I still interest it.
      • my email:chixkei@netvigator.com

[Date/Time=03-04-2003 – 11:41 AM]

Name:Anthony Choi chixkei@netvigator.com, [Msgid=388901]
Re; PT 50 Found

      • again

[Date/Time=03-04-2003 – 11:24 PM]

Name:Peter CHEUNG cckkww@hotmail.com, [Msgid=389427]
Attached File  “pt50movie5sec~MPG.zip” – size 884204   Click Here To Download
Re; Re; Re; About PT-50 model

ViewThread

      • Dear Mr. Anthony CHOI,
      • Please see photos of model PT50 in Box.
      • Peter CHEUNG.

[Date/Time=03-05-2003 – 10:17 AM]

Name:Peter CHEUNG cckkww@hotmail.com, [Msgid=389631]
Attached File  “PT50BOXVCDPHOTO~MPG.zip” – size 18532   Click Here To Download
Re; Re; Re; About PT-50 model

      • Photo again with box opened and boat seen inside.

[Date/Time=03-05-2003 – 11:07 AM]

Name:Peter CHEUNG cckkww@hotmail.com, [Msgid=389661]
Attached File  “PT50BOXOPENWITHBOATPHOTO~MPG.zip” – size 16208   Click Here To Download
Re; Re; Re; Re; About PT-50 model

      • I can’t view this video.

[Date/Time=03-05-2003 – 11:58 AM]

Name:Anthony Choi chixkei@netvigator.com, [Msgid=389691]
PT-50 Model FRECCIA dORO

      • I live in Messina, Italy. I have built a PT 50 model in wood, to 1/20 scale. It’s propulsion is electric, but it can be equipped with two diesel motors. The hydrofoil model is an exact reproduction of the famous

FRECCIA D’ORO

      • . For more information, contact me!


[Date/Time=03-07-2003 – 7:05 PM]

Name:Vincenzo Annuario enzo.annuario@tin.it, [Msgid=391268]
RC Model Hydrofoil Plans Found

ViewThread

      • I looked on various websites for a good/damaged Shockwave R/C model that I could reverse engineer and scale up in size, but I was unable to find anything at all. However, when searching the web for a starter/plan I did find through Traplet Publications a plan for a hydrofoil. It is the “Rapier” by Graham Taylor previously featured in “Marine Modelling Magazine” (also Traplet) The plan number is MAR2392, and it is also possible to acquire the copy of Marine Modelling Magazine through this company (issue no. 69 December ’92) that gives a build overview and other usefull building infomation. The plan and magazine combined cost about ?10. I’ve had mine on the go for about a two weeks now (I’m a patient builder!) and it’s coming along nicely.

[Date/Time=04-08-2003 – 8:34 PM]

Name:Mike Keen miket.keen@tiscali.co.uk, [Msgid=412916]
Re; RC Model Hydrofoil Plans Found

      • Hi Mike, information about this magazine issue and several others devoted to hydrofoil models is posted in our correspondence archives at

http://www.foils.org/popmags.htm#mod

      • . The website for Traplet publications is:

http://www.traplet.co.uk/

      • . Graham Taylor’s most interesting website is at

http://www.home-taylor.freeserve.co.uk/index%20ekranoplan%20man.html

      • . You should not hesitate to contact him through his website if you have questions. Of course we would like to have photos and lessons learned for our newsletter when your model is perfected.

[Date/Time=04-08-2003 – 8:41 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=412926]
Condor I Model Kit

ViewThread

      • Thought I’d just send you a picture of the completed Condor 1. The kit has been great fun to put together and was very well engineered despite the age of it. Trials have been extremely successful with the boat going straight up on its foils and even turning without coming off – a problem which I believe these models suffered from. I think the modern equipment I’ve used has helped – the motor is more efficient as is the electronic speed controller – and the weight has been reduced as well.


[Date/Time=06-02-2003 – 8:27 PM]

Name:Nick James ncjames2@cwgsy.net, [Msgid=446033]
Re; Condor I Model Kit

      • Thanks Nick. We were not using the automated BBS yet when you first contacted IHS about wanting a model kit. Therefore I will reproduce below some of your previous correspondence as background:
      • “[26 Feb 03] I thought I’d write just to let you know that after 22 years of searching ( and 3 years since posting my original email on IHS) I have finally managed to find a Super Comet PT50 model. I was approached by email in response to my posting here, and I took a risk – after 22 years I thought it was worth it, and the model arrived today. It was found in a model shop in Italy, and it looks as though all of the parts are there including the assembly instructions and decals. I’ll post some pictures when completed – hopefully in a month or so. Thanks for your help in finding the model.”
      • Note that for those interested in hydrofoil models, there is a wealth of interesting correspondence in the pre-BBS archive on our page at

http://www.foils.org/modelrc.htm
[Date/Time=06-02-2003 – 8:32 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=446038]
Russian Model Wanted

      • We are in the high speed ferry business and have developed catamarans using fixed hydro supportive foils. I am looking for a completed model of a early hydrofoil, preferably Russian. Can you guide me as to where I may find this?
      • Hydrocruiser Ventures, Box 438, Roadtown, Tortola, British Virgin Islands.

http://www.hydrocruiser.com
[Date/Time=06-02-2003 – 8:45 PM]

Name:Raymond Kalley RKalley@hydrocruiser.com, [Msgid=446043]
PT 50 Advice Needed

      • I have one of these kits that I am looking at putting together. Do you have any more details about what you used and why? Could you send some pictures of the inside and outside of the boat?

[Date/Time=06-13-2003 – 5:44 AM]

Name:Kelly Cunningham kelly.cunningham@hrc.utah.edu, [Msgid=451950]
Tucumcari Model fror sale

      • There is an unbuilt Tucumcari model from Aurora, on Ebay at the moment.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3135555936&category=2590

      • Malin

[Date/Time=06-17-2003 – 12:26 PM]

Name:Malin Dixon gallery@foils.org, [Msgid=454231]
PT50 model wanted

      • I am after a Model of a PT50. Can anyone help? I require one for static viewing or a working model if anyone has one. I know they are hard to get but who knows what is out there.

[Date/Time=06-29-2003 – 6:40 AM]

Name:Adrian Moitie Adrianmoitie@aol.com, [Msgid=461561]
model of phm 5

ViewThread

      • trying to fine a model of phm-5 can any one help.

[Date/Time=06-30-2003 – 5:28 PM]

Name:roger barker from old phm-5 roger050@yahoo.com, [Msgid=462322]
Re; model of phm 5

      • Check out this site,it’s not the PHM-5 but the Phm-4.

http://home.wanadoo.nl/~hydrofoils1/phm.htm

      • The USS-Aquilla(Radio Controlled model).
      • The model is build in a scale of 1:30,this makes her length 135 cm, beam 48 cm, and the weight is 14 kg.
      • The model is build according to the original drawings of the Boeing company.
      • In that time there where no propulsion jets fore such big models.

[Date/Time=07-02-2003 – 2:39 PM]

Name:Capt M van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=463453]
Re; model of phm 5

      • White Ensign Models offers a 1/350 model PEGASUS kit. The kit consists of of a cast resin hull, with white metal and photoetched parts. The kit includes comprehensive assembly and painting instructions. You could build that, change the number, and tweak the details main deck and above. The website is at

www.whiteensignmodels.com

      • . The postal address is: White Ensign Models, Gardeners Cottage, Cowarne Court, Lower Eggleton, Ledbury, Herefordshire, HR8 2UF, U.K. The cost of the model is in British Pounds equivalent to about $35.50 USD, including air shipment worldwide.


[Date/Time=07-03-2003 – 5:31 AM]

Name:Barney C Black webmaster@foils.org, [Msgid=463803]
Helo Blades as RC Model Foils

ViewThread

      • I intend to build an R/C model hydrofoil from scratch. Reading your website increases my interest in building my model. The “only” problem is the foils. Does anyone know how to use blades from an RC model helicopter as foils on a hydrofoil boat model? The effect of the slow running water must be similar to the air at a helicopter.
      • What do you think?

[Date/Time=07-28-2003 – 6:55 PM]

Name:Tom Delling stennis@t-online.de, [Msgid=477683]
Re; Helo Blades as RC Model Foils

      • Hello Tom,
      • Your idea to use the blades from RC model helicopters for a hydrofoil model project makes good sense. This lask weekend I had a look at some model helicopters and also thought the blades could be suitable for RC hydrofoil models. Some of the higher performance model helicopter blades are now built up using a foam core and thin carbon fibre skins. These would be tough enough to cope with the occasional impact if used on a hydrofoil model. Some of the potential drawbacks of using helicopter model blades may be:
      • 1. They seem to have a chord length of 50mm or more, even for the smaller helicopter models. You would therefore need to consider building a fairly large scale hydrofoil model for these blades to be in reasonable proportion to the rest of the model.
      • 2. They have a quite large thickness to chord ratio, perhaps 10% or greater. This is more than typical required for the profile for a model hydrofoil. Although this should not be of much concern, there is likely to be a drag penalty in comparison to thinner section foils.
      • 3. They typically appear to have symmetrical profiles (same shape for top and bottom of blade). You would get a somewhat better lift to drag ratio using a cambered foil shape.
      • 4. Some of the less expensive blades still use balsa wood cores. Such blades would probably swell up and distort if immersed in water for a longer time.
      • An alternative that I am aware has been used successfully by some hydrofoil modellers is to purchase an aluminium ‘crescent’ extrusion. These are usually used for applications such as joint strips between carpet and lino flooring in houses. You may be able to obtain short lengths of such sections from a hardware shop or metal retailer. They come in widths (chord lengths) between about 30mm and 45mm.
      • If you go ahead and make use of model helicopter blades for your hydrofoil model, please report back on how they perform. Using them would certainly reduce the time and effort needed to build a hydrofoil model.

[Date/Time=07-29-2003 – 10:11 AM]

Name:Martin Grimm seaflite@alphalink.com.au, [Msgid=478064]
Re; Helo Blades as RC Model Foils

      • Here are some rough ideas on how to calculate the lift of model helicopter blades when used as hydrofoils.
      • First you must have some idea as to the coefficient of lift for a blade of the cross section you have chosen.
      • Let?s assume the blade?s profile is asymmetrical and its thickness is 12% of the cord. An example of this type of wing would be a NACA 4412. From theory of Wing Sections, by Abbott and Doenhoff, you will see that the change in the coefficient of lift (Cl) will be linear from minus 10 degrees angle of attack (AOA) to 12 degrees AOA. At ?10 degrees the Cl is -.67. At 12 degrees the Cl is 1.55. Draw a graph with a line between these two points and you will know what Cl you have for any useable AOA. For example, 2 degrees AOA will generate a Cl of .6
      • To find the lift for any assumed AOA use the simplified lift formula L = F U^2 S Cl.
      • Where L is lift.
      • F is a factor and that factor is 2.09.
      • U is the velocity in MPH.
      • S is the area of the foil in feet^2.
      • Cl is the coefficient of lift from your graph.
      • So if you choose a foil of one tenth of a square foot flying at 10 MPH and the coefficient of lift is .6 (that is to say you have an angle of attack of 2 degrees) you will have lift of 2.09 x 10 x 10 x .1x .6 = 12.54 pounds.
      • You know that the lift required is equal to the weight of your model. Now that you have the formula you can change the various assumptions to arrive at the lift required.
      • Good luck.
      • Ray Vellinga

[Date/Time=07-30-2003 – 1:50 AM]

Name:Ray Vellinga rvell@san.rr.com, [Msgid=478612]
Grumman Concept Display Model

ViewThread

      • I saw this interesting display model for sale on eBay. The description reads as follows: “Offered here is a rare and unusual manufacturer’s model made by the Grumman Corporation. No date appears anywhere on the model, but appears to be from the 1960s. The model is a scale prototype of a “Hydrofoil Research Craft”. I do not believe that such a craft ever really was built, but it was to be 104 ft. long with a beam of 23 ft. She was to weigh 90 tons with a top speed of 60 knots. This desk-top model is approximately 14″ long. The base is made from solid walnut and measures about 5″ X 16″. The model is heavy, and appears to be constructed from cast metal and solid cast resin. The side foils hinge up, and the motor assembly in the stern also hinges up.”
      • The auction ends August 10, 2003. Here is a link to the page on eBay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2186468518&ssPageName=ADME:B:SS:US:1


[Date/Time=08-04-2003 – 6:00 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=481632]
Re; Grumman Concept Display Model

      • It appears to be a model of the hydrofoil “Denison” built by Grumman. I have a photo of her foilborn and was onboard her in the late sixties early seventies when she was in a cradle at San Diego.

[Date/Time=08-05-2003 – 1:58 PM]

Name:Dale Beresford dalkar1@msn.com, [Msgid=482171]
Re; Grumman Concept Display Model

      • I am attaching a photo of the hydrofoil “Denison” which I think is the ship the model represents.

[Date/Time=08-05-2003 – 2:03 PM]

Name:Dale Beresford dalkar1@msn.com, [Msgid=482175]
pt 50 model

ViewThread

      • i would like to rebuild a pt 50 hydrofoil model i would like to know if you know someone who has one for sale or information on how to rebuild one

[Date/Time=10-21-2003 – 11:27 AM]

Name:scott llewellyn Lljulie499@aol.com, [Msgid=529061]
pt50 model wanted

ViewThread

      • i have been wanting a pt 50 hydrofoilo for about 1 year now and i was wondering if you know where i could buy one or rebuild one

[Date/Time=10-21-2003 – 11:45 AM]

Name:scott llewellyn Lljulie499@aol.com, [Msgid=529070]
pt 50 model wanted

      • i have been looking for a pt 50 rc hydrofoil model i was wondering whever you know any places or people who could help with my search. i also want to rebuild one so do you know where they might be selling them or you have some prints that could help[ me rebuild one

[Date/Time=10-21-2003 – 12:12 PM]

Name:scott llewellyn Lljulie499@aol.com, [Msgid=529086]
Re; pt 50 model

      • Try Ebay.com for a PT-50 RC model,look for hydrofoil.
      • My colleague found one on ebay.de (germany)look for Tragfl?chenboot.
      • But most germans ship only in germany.
      • If you want to build one try to get good plans,
      • and photo’s.
      • Good luck!!!

[Date/Time=10-22-2003 – 5:42 AM]

Name:Capt M van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=529748]
Re; pt 50 model

      • This will not be easy to find. Take a look at the IHS pages at

http://www.foils.org/modelrc.htm

      • and

http://www.foils.org/models.htm

      • for names and email addresses of people active in hydrofoil modeling. According to one correspondent Nick James, he searched for 22 years before finding a Super Comet PT-50 model (

CONDOR I

      • ) in Italy. He took a chance and bought it. There is a photo of the completed R/C model on the IHS site.

[Date/Time=10-25-2003 – 7:55 PM]

Name:Barney C Black webmaster@foils.org, [Msgid=532304]
PHM; Patrol Hydrofoil Missileship

ViewThread

      • For sale:PHM: Patrol Hydrofoil Missileship!!!
      • Check:

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=3566908874&category=9160

      • This is a Radio Controlled model of the USS Aquilla, one of the PHM class hydrofoils used by the US navy.
      • The model is build in a scale of 1:30, this makes her length 135 cm, beam 48 cm, and the weight is 12 kg.
      • The model is build according to the original drawings of the Boeing company.
      • The aft foil can be controlled by a servo and gyro.
      • If you take away the deckgun, you can see the bowtruster and the mechanism to steer the bow foil.
      • the deckgun and radar rotate the Bow foil is used for steering it has a bowthruster (Bugschraube) for maneuvering
      • Deck, deckhouse and foils are made of aluminium.
      • Included:
      • – Model
      • – mould, to make a new PHM hull
      • – photobook, with many original photo’s
      • – many original drawings of the complete ship from boeing
      • – 18 cell NiCd 4 Amp!!! (25,2V)
      • – 4 cell NiCd 4,8 V for receiver
      • – 4 cell NiCd 4,8 V for bowthruster
      • – receiver

[Date/Time=11-20-2003 – 5:48 AM]

Name:Capt M van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=547275]
32nd Parallel Schnellboot Hull Source

ViewThread

      • What I have for you is information about the WWII Schnellboot. 32nd Parallel is out of business. However, there are two companies currently manufacturing fiberglass hulls for this boat and selling the hulls with some drawings (not a kit). This assumes some scratch building. They are: from England: (1/30th scale) Kingston Mouldings: email:

kingston.rw@lineone.net

      • website: KingstonMouldings.co.uk
      • The other one is an American company: (1/32nd scale) Microglass (you’ll find it if you use a search engine.) I am building the one from Kingston Mouldings.

[Date/Time=11-27-2003 – 10:50 AM]

Name:Steve Ebel stebel@stannslonggrove.org, [Msgid=550950]
re;

      • Hello
      • Here is another company that sells a VS8 in 25th scale.

http://www.harhaus.de/neuheiten2003.htm

      • . It is located in Germany.
      • about $1200 for a full kit without ship.
      • Antoine

[Date/Time=12-05-2003 – 5:53 PM]

Name:Antoine Lenormand antoine.lenormand@wanadoo.fr, [Msgid=554852]
 Image Attached:  “schell06.jpg”   Click Here To View
Re; PHM; Patrol Hydrofoil Missileship

      • possible to ship to the U.S.? possible to trade for unbilt kits of 32nd schnellboot and Hegi police boat hydrofoil , and cash? please reply thanks .

[Date/Time=12-22-2003 – 4:17 PM]

Name:Stephen Mc Donald shark15@optonline.net, [Msgid=562352]
Re; PHM; Patrol Hydrofoil Missileship

      • sorry ! just realized that you already sold the missileship. if you should come up with another please e-mail thanks. steve

[Date/Time=12-22-2003 – 4:32 PM]

Name:Stephen Mc Donald shark15@optonline.net, [Msgid=562357]
re;

      • Hi Steve
      • I am the happy owner of that beauty. The builder (Ronald) did a marvellous job. I would be happy to share some pics with people interested. I am modifying it with the original foils and waterjet propulsion. It will have an automatic control in roll and pitch to help during foilborne runs.
      • Antoine

[Date/Time=12-24-2003 – 1:29 AM]

Name:Antoine Lenormand antoine.lenormand@wanadoo.fr, [Msgid=562900]
 Image Attached:  “PHM4_2.JPG”   Click Here To View
Re; re; PHM model pics

      • can’t open the jpeg

[Date/Time=01-01-2004 – 11:11 PM]

Name:Dan Schmidt gse2schmidt@hotmail.com, [Msgid=565629]
cRe; Re; re; PHM model pics

      • If you want I can send some pics by email.
      • Antoine

[Date/Time=01-03-2004 – 11:08 AM]

Name:Antoine Lenormand antoine.lenormand@wanadoo.fr, [Msgid=566157]
Re; pt 50 model

      • HI,
      • I have just seen on in ebay.
      • Peter from Hong Kong

[Date/Time=01-15-2004 – 12:04 AM]

Name:Peter CHEUNG www.cckkww@hotmail.com, [Msgid=571745]
Re; pt50 model wanted

      • Hello there,
      • I have just seen a PT50 hydrofoil model in ebay and its item number is 3169557927.
      • Hoping that this information would be helpfulto you and good day.
      • Peter from Hong Kong

[Date/Time=01-15-2004 – 6:28 AM]

Name:Peter CHEUNG www.cckkww@hotmail.com, [Msgid=571824]
Re; Re; pt 50 model

      • Hello Peter , I am a member of the hydrofoil society and I was wondering , after seeing your message , where can I see and bid on this PT 50. On which E-Bay is it on? Thanks Stephen Mc Donald

[Date/Time=01-15-2004 – 3:32 PM]

Name:Stephen Mc Donald shark15@optonline.net, [Msgid=572094]
Re; Re; pt 50 model

      • Hello again Peter , I just found the item your were talking about on E-Bay , thank you very much for bringing this to our attention. If you should ever need anything from this side of the world please just E-Mail . Thanks again Steve

[Date/Time=01-15-2004 – 4:00 PM]

Name:Stephen Mc Donald shark15@optonline.net, [Msgid=572107]
Re; Re; pt50 model wanted

      • Just to let everyone know that the PT50 Model went for over $900.00 on e-bay!!! Wow
      • Rod Clayards IHS Member

[Date/Time=02-01-2004 – 5:52 PM]

Name:Rod Clayards rodbev@shaw.ca, [Msgid=582129]
RC PHM-1 Pegasus

ViewThread

      • I am in the process of undertaking the construction of a 6′ Radio Controlled PHM-1 Pegasus. My father was a Chief (ETC Nosek was his rate I believe) on the first crew, and I stood on the pier as a 9 year old kid on her first arrival to Key West. (Man, how the Coast Guard scratched their heads when she broke the horizon!) I would like to know if anyone has a copy of schematics, or technical drawings for her or the others. Due to the fact that she’s gone and I’ll never see her fly again, I want to build one that will. Also, since some of the correspondance on your pages are dated, what ever came of the others that were due to be scrapped. Are there anymore out there. Feel free to contact me at

laseredgt01@aol.com

      • . Thanks, TDM

[Date/Time=03-04-2004 – 3:54 PM]

Name:T.D. Mehl laseredgt01@aol.com, [Msgid=607827]
6` Radio Controlled PHM-1 Pegasus

ViewThread

      • I am in the process of undertaking the construction of a 6′ Radio Controlled PHM-1 Pegasus.? My father was a Chief (ETC was his rate I believe) on the first crew, and I stood on the pier as a 9 year old kid on her first arrival to Key West.? (Man, how the Coast Guard scratched their heads when she broke the horizon!)? I would like to know if anyone has a copy of schematics, or technical drawings for her or the others.? Due to the fact that she’s gone and I’ll never see her fly again, I want to build one that will.? Also, since some? of the correspondance on your pages are dated, what ever came of the others that were due to be scrapped.? Are there anymore out there.? Feel free to contact me at

laseredgt01@aol.com

      • .? Thanks, TDM

[Date/Time=03-04-2004 – 7:59 PM]

Name:TDM laseredgt01@aol.com, [Msgid=607933]
6` Radio Controlled PHM-1 Pegasus

      • Several documents with PHM technical information are included on the IHS AMV CD-ROMs including the original Builders Spec. I see that Floating Drydock is offering a set of PHM Hull faired lines and stations at 1/48 scale for $12. See their web page at

http://www.floatingdrydock.com/HULL.htm

      • . White Ensign Models offers a PHM kit. See their website at

http://www.whiteensignmodels.com/

      • . They sell their kit direct from the website, and they also have dealers that sell their products. See the following website for photos of a completed kit and hints for building:

http://steelnavy.com/wem_pegasus.htm

      • . Hope this is helpful. Please send photos and description of your model in process and finished for the IHS newsletter. Send to

editor@foils.org
[Date/Time=03-12-2004 – 7:36 PM]

Name:Barney C Black barney@alum.mit.edu, [Msgid=612693]
Re; RC PHM-1 Pegasus

      • See the IHS correspondence archive page at

http://www.foils.org/restore.htm

      • for PHM contacts. One PHM is floating in Missouri. Last I heard, all or most of the others were in Wilmington, NC and were slowly being scrapped by their owner, an individual.

[Date/Time=03-12-2004 – 7:41 PM]

Name:Barney C Black barney@alum.mit.edu, [Msgid=612697]
6` Radio Controlled PHM-1 Pegasus

      • I just recalled that there is a guy who periodically sells copies of a drawing “OUTBOARD, OVERHEAD PROFILE & BODY PLAN” on eBay, if this would be of any help. His description is as follows:”Size of drawing is 23″W x 102″L. Scan on EBAY photo is terrible; drawing is very crispy, sharp. Buyer pays with US or Canadian Postal Money Order (US funds please!); shipping & handling is $ 10.50 within a rolled tube to 48 US states; Hawaii, Alaska or Canadian destination are $ 16.50 S/H. Overseas shipping on a case by case basis.” He has a copy up for auction now, item no. 2232579032 and the auction ends Mar 22. But if you miss this one, he will auction another copy soon. His eBay nickname is drydockjoe. You can contact him directly with questions by becoming an eBay member (free) and using the search feature to find him.

[Date/Time=03-16-2004 – 5:06 AM]

Name:Barney C Black barney@alum.mit.edu, [Msgid=614939]
PHM-1 Pegasus

      • Gentlemen,
      • Progress has come along nicely on the 6’6″ PHM-1 Pegasus. I know have a 24″ wide 6’9″ block of foam in order to to start shaping the Pegasus hull. I have secured the required HydroJet engines to push the boat once she is 14.4″ out of the water. I will build her out of carbon fiber. If the real Pegasus would do 60-70mph, I won’t rest until mine will do at least that! I have the radar guns ready. I will supply pictures once they are ready of the boat as she progresses. If I get a RC hydrofoil to do 70mph she will make the cover of magazines, everybody get ready for the stir! Anyone here remember my Dad? ETCS Lawrence Nosek, he was a 1st Class in Bremerton, then picked up Cheif, and Snr Chf before we left Key West in approx.’83. Thanks, and all of your suggestions, and pointers have been most helpful. Thanks, Troy Mehl

[Date/Time=03-17-2004 – 12:36 AM]

Name:T.D. Mehl laseredgt01@aol.com, [Msgid=615563]
PT-50 For sell

      • I have a PT-50 Super Comet kit for sell on ebay. The kit is new, in the box.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3186991152&category=2564&sspagename=STRK%3AMESSE%3AIT&rd=1
[Date/Time=04-08-2004 – 7:44 PM]

Name:Kelly kcunning@hrc.utah.edu, [Msgid=628494]
 Image Attached:  “IMG_00072.jpg”   Click Here To View
Plans for Kometa Model Needed

ViewThread

      • On your website I found model of Russian Meteor produced somewhere in Italy. Can you provide me more details – contacts – or do you know who hs a plans for such hydrofoil?

[Date/Time=05-31-2004 – 8:16 AM]

Name:Peter Caha pcaha@franklinfueling.com, [Msgid=656324]
Re; Plans for Kometa Model Needed

      • I believe you refer to the large model produced by Siderea in Rome. It was sold by Mantua Model, Italy. Photos and information about this model are provided by IHS correspondent Ho Sing in the IHS archives at

http://www.foils.org/modelrc.htm

      • (scroll down to find photos and messages). You may want to contact Ho Sing and some of the correspondents who answered his posting. There is a scan of the model kit directions at

http://www.foils.org/mantua1.jpg

      • .

[Date/Time=05-31-2004 – 8:27 AM]

Name:Barney C Black bblack11@cox.net, [Msgid=656326]
Re; Plans for Kometa Model Needed

      • Well, what do you want to know?? I own one,and have two drawing in 1:2 scale.

http://home.wanadoo.nl/~hydrofoils1/kometa.htm

      • I hope I can help you.

[Date/Time=06-02-2004 – 8:00 PM]

Name:Mark van Rijzen dutchhydrofoils@wanadoo.nl, [Msgid=657936]
Introduction of my R/CHydrofoilsModels wo

ViewThread

      • Hello. Mr.International Hydrofoil Society WEV master — I am Yoichi Takahashi is living in Kyoto by the radio control ship modeler of Japan On WEB,HP of an international hydrovane was discovered in the meantime, and itvisited it several times. I think that it is glad from very interesting contents. From several year before, although I was tackling radio control modeling of a hydrofoil, I succeeded in radio control-ization of the hydrofoil of 2 boats lately. Then, I contribute to your HP and think that I would like the modeler in the world to know. Since image data sends, please give me introduction by all means by HP. One is 1/40 of the scale models of the Boeing jetfoil. Sailing of all rejection type hydrofoils was realized by carrying out attitude control using the small gyroscope for model radio control helicopters. Although the promotion method was a propeller system, hydrovane control theory developed originally. The 2nd is the hydrovane patrol guided missile of the Maritime Self Defense Force of Japan. This ship realized surfacing sailing using the hydrovane by the same water jet promotion as thing. The water jet pump is using the miniature turbine pump of a full its original work. The hydrovane control theory of original development andthe gyroscope for model radio control helicopters are used also for this,and it stabilizes and runs by surface control. All run power by the electric motor of a nickel-Cd battery drive of 7.2V. Since the snap oftwo pictures and me is sent, please give me printing in the section ofthe radio control hydrofoil your homepage. In addition, you may alsocarry my E mail address. Thank you for your consideration. About my R/C hydrofoil, if there is a question, please inform the following and E mail address. Above yoichi takahashi

[Date/Time=06-12-2004 – 1:28 AM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=663149]
 Image Attached:  “scan0001.jpg”   Click Here To View
Introduction 2 my R/CHydrofoilsModels

      • The 2nd work of my R/C model hydrofoil is introduced. The 2nd is the hydrovane patrol guided missile of the
      • Maritime Self Defense Force of Japan. This ship realized surfacing
      • sailing using the hydrovane by the same water jet promotion as thing.
      • The water jet pump is using the miniature turbine pump of a full its
      • original work. The hydrovane control theory of original development and
      • the gyroscope for model radio control helicopters are used also for this,
      • and it stabilizes and runs by surface control.

[Date/Time=06-12-2004 – 1:54 AM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=663155]
 Image Attached:  “missilefoil.jpg”   Click Here To View
Introduction 1 my R/CHydrofoilsModels

      • One is 1/40 of
      • the scale models of the Boeing jetfoil. Sailing of all rejection type
      • hydrofoils was realized by carrying out attitude control using the small gyroscope for model radio control helicopters. Although the promotion method was a propeller system, hydrovane control theory developed originally.

[Date/Time=06-12-2004 – 2:00 AM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=663156]
 Image Attached:  “jetfoil.jpg”   Click Here To View
Introduction 3 my R/CHydrofoilsModels

      • My snap and I developed over the time for three years. Boeing jetfoil Recently image of 1 / 40 scale R/C model

[Date/Time=06-12-2004 – 2:08 AM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=663157]
 Image Attached:  “DSCF0011.JPG”   Click Here To View
6` Radio Controlled PHM-1 Pegasus

      • Well here are images of a PHM model on motor pods.

http://www.rcgroups.com/forums/showthread.php?t=41502&page=9&pp=15

      • RCgroups is a nice BBS format if anyone wants to try to incorporate it into this site. I find this style of bbs, the phpBB Group, and Invision Power Boards very easy on the eyes.
      • Also, I recommend the plans from floating drydock. My “engineer” has finished his 1-1 airplane build and has begun to focus on the model PHM project. We are not headed toward anything as large as six feet though.
      • Here is an image of his engine and jet pump in the cardboard model of the stern that I produced for him.

[Date/Time=06-14-2004 – 1:02 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=664081]
 Image Attached:  “Pump01.JPG”   Click Here To View
Introduction of my R/CHydrofoilsModels wo

      • Hello Yoichi Takahashi, thank you very much for sharing these exciting photos and inventive designs. I hope that the editor of the IHS newsletter will publish these photos in the next edition and that the photo gallery editor will display them on the website. You have done some excellent work!

[Date/Time=06-14-2004 – 8:37 PM]

Name:Barney C Black bblack11@cox.net, [Msgid=664286]
6` Radio Controlled PHM-1 Pegasus

      • Hi Aimee, thanks for that URL with the excellent series of photos on the model PHM. Also, it is great to hear that you are starting on your PHM model after all these years of contemplation! For some reason I was not able to view the photo you attached to your posting, though… I am not sure why… maybe damaged in uploading.

[Date/Time=06-14-2004 – 8:44 PM]

Name:Barney C Black bblack11@cox.net, [Msgid=664288]
6` Radio Controlled PHM-1 Pegasus

      • I have noticed that same problem with other uploaded images on this board. I will upload it again, if it doesn’t work, I will post it at the R/C groups site.

[Date/Time=06-15-2004 – 12:46 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=664561]
 Image Attached:  “Pump01.JPG”   Click Here To View
What model wetbike do I have

ViewThread

      • I have a Spirit Marine Suzuki made moter and it says wetbike on the handlebars. It was given to my Dad years ago, then he have it to me last week. I do have a serial #. How do I find out what year model I have. Thanks for your help.

[Date/Time=06-22-2004 – 11:45 AM]

Name:Darlene Chancery bobdarcy2001@yahoo.com, [Msgid=667971]
Re; What model wetbike do I have

      • Look at the WetBike’s serial number located on the rear of the craft(not the state’s registration number). US Standardized serial numbers use the first 3 letters (WJW for Wetco) to denote the boat manufacturer. The last 2 digits are the model year. Many WetBikes are late 70’s and early 80’s.
      • The engine is a product of Suzuki of Japan, so US parts may not fit. Suzuki gave me Ultranautics (800 356-0777) for replacement parts.
      • The WetBike was a lot of fun to ride and drew a lot of looks. It handled more like a motorcycle than jet ski. However, the WetBike is not a hydrofoil. The foils ride on the surface of the water like a wakeboard. I have an ’85 model stored in my shop.

[Date/Time=06-23-2004 – 3:03 PM]

Name:Barry Steele barry_steele@yahoo.com, [Msgid=668696]
Introduction 2 my R/CHydrofoilsModels

      • Utsukushi desu!!
      • ?????m san
      • If Possible could you provide pictures of the water intakes, engine, pump and controls inside your Spaverio model.
      • Aimee Eng

[Date/Time=07-01-2004 – 1:29 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=673211]
Nikko R/C Hydrofoil for sale

      • Hello,
      • I have a Nikko Radio Controlled Hydrofoil currently on auction at ebay. Please have a look. There is No Reserve on the auction! This is a discontinued item!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2564&item=5907840509&rd=1&ssPageName=WDVW
[Date/Time=07-06-2004 – 8:49 PM]

Name:Kenji Watabe kenjiwaterbee@hotmail.com, [Msgid=675438]
Introduction 2 my R/CHydrofoilsModels

      • Hello. Mr,Aimee Eng.
      • Responding to your request, the picture of the water intake of my hydrovane patrol guided missile?@ship and an inboard mechanism is sent here. A water intake is the same structure as real ship. The electric motor which drives the waterway and water jet pump to a pump is carried in the inside.
      • Above

[Date/Time=07-10-2004 – 8:59 PM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=677558]
 Image Attached:  “WateIntakes.jpg”   Click Here To View
Introduction 2 my R/CHydrofoilsModels

      • Arigato Gozaimasu. Shashin ii desu.
      • (demo watashi onna desu.)
      • Thank you for posting the new images. However, they bring up more questions.
      • Does the entire waterway inside the boat fill up with water, and remain full as the boat runs?
      • Does it siphon feed fresh water or does it rely on forward speed to supply the intake.
      • You mention the motor supplying the waterway and jetpump are there two impellers? One to draw water into the waterway and one to push the boat forward?
      • Shitsureishimasu
      • Aimee Eng

[Date/Time=07-11-2004 – 9:08 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=677894]
Introduction 2 my R/CHydrofoilsModels

      • Hi! Aimee Eng san conbanwa!
      • I reply to your question.
      • If a hydrofoil is soaked in the water surface, water permeates from a water intake and the injection mouth of a jet pump. The water will
      • small air slightly into a water duct, and will fill most. If rotation of a turbine pump increases in order to start a ship, with jet injection of water, the air in a water duct will serve as a bubble, and will be discharged. Therefore, it is filled with water at the time of a foil born, and the inside of a duct can supply water to a turbojet pump continuously. It inhales with the amount of injections of a turbojet pump, and quantity and hull speed need to carry out the design which maintained balance in relation to mutual for efficient and continuous operation of a turbojet pump. Since the illustration in order to help an understanding is appended, please refer to. Then,
      • PS: It is very good at Japanese in your Roman alphabet. Can Japanese be spoken?
      • Above

[Date/Time=07-17-2004 – 10:09 AM]

Name:yoichi takahashi skyex@triton.ocn.ne.jp, [Msgid=681043]
 Image Attached:  “hidrofoil-1.jpg”   Click Here To View
Introduction 2 my R/CHydrofoilsModels

      • Mo arigato gozaimasu
      • I can speak a little Japanese, but my vocabulary is small.
      • Since my friend has again gone flying, the PHM project is halted on account of good weather.
      • I had intended to start a PT-50 project to fill the hydrofoil project time, as they are “v” foils and propeller driven. An easier project.
      • However you have inspired me to attempt another jet drive on my own. And make this an electric project.
      • Here are the frames I cut today.
      • Left PT-50
      • Right Sparviero Missle hydrofoil

[Date/Time=07-17-2004 – 2:50 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=681182]
 Image Attached:  “P1010022copy.jpg”   Click Here To View
Introduction 2 my R/CHydrofoilsModels

      • Here is today’s progress on the Sparviero Missle foil hull.
      • It is sheeted and ready for fiberglass.


[Date/Time=07-18-2004 – 9:57 PM]

Name:Aimee Eng umi_ryuzuki@hotmail.com, [Msgid=681592]
 Image Attached:  “P1010027a.jpg”   Click Here To View
RHS 160 F- Foil Arrangement

      • I want to build a RHS 160F and so I am searching for detailed plans, also of the foil arrangement. I am searching for a side view, a top view and a front view. Perhaps anyone can help me.

[Date/Time=07-19-2004 – 5:17 PM]

Name:Felix Marsteller marsteller.honnef@t-online.de, [Msgid=681975]

 


View Messages Search Messages Return to Home Page Frequently Asked Questions
This board has been viewed 21680 times since Apr-20-2002 .
(Total Views Since Board Creation on Mar-21-2002 is 22414.)


Questions about this board, email: bbs@foils.org
System Support, Email: support@bulletinboards.com

To Learn About Bulletin Boards:  Click Here
Bulletin Board Management Site: Click Here

(321) 984-9080
© 1997 – 2004 P.A. Corp. V7.1

 International Hydrofoil Society Photo Gallery
[Early Hydrofoils] [1950s — A Decade of Experimental Progress] [Large Scale Test Hydrofoils] [US Navy Developmental Hydrofoils] [Canadian and European Hydrofoil Developments] [US Navy Fleet Hydrofoil — PHM] [Hydrofoils Around the World] [What’s Next?] [Sailing Hydrofoils] [Personal Hydrofoils] [Model Hydrofoils] [Commemorative Covers] [Postage Stamps] [Postcards] [Badges etc] [Hydrofoils for Sale] [Hydrofoil Pioneers] [Miscellaneous]

Aurora model of TUCUMCARI
www.ebay.com sometimes offer these for sale.

44k
Kit box
25k
31k
Thunderstreak The Thunderstreak model with its “multi-position hydro wing” was made by Ideal Toy Company, and came out in 1967. The boat is plastic, and the propulsive force is provided not by batteries, but by 2 large rubber bands. The Thunderstreak also cruises under water, skis on snow and ice, and zooms over land. 26k 29k
Shockwave
More information
PT-50 Unique Japanese radio-controlled hydrofoil PT-50 plastic model kit made in early 1980’s. 38k
PT-50 Model built (and rebuilt) by Mark van Rijzen
More information
Rebuild information
(37k)
(50k)
(48k)
A hard-to-find kit made by Gunze Sangyo of Japan of the SUPER COMET Hydrofoil in 1/40 scale. The hull is 670mm long, 163mm wide. Width with hydrofoils is 315mm. The foils are made of metal. Instructions are in English. There are over 150 parts to this kit, including the controller.
59k
SUPER COMET made by Matthias Rom
More pictures and more information
Radio controlled model hydrofoil with submerged foils and autopilot 55k
This is a shot of the Hydroflier 1/3 scale concept-test model during tests. Full size boat
For further info click here for the BYYC
7k
Model VS-8
(16k)

(8k)

(20k)
Two-ship kit, contains the FFG 7 PERRY frigate or FFG 43 THACH and the PHM-1 PEGASUS Class Hydrofoil Missile Ship. Kit made by the SKYWAVE company, makers of beautifully detailed 1/700 scale warship model kits.
24k

127k

44k
Model of Bell and Casey’s HD-4 Hydrodrome built by Dave Acker.
More information

47k

43k
HOT-FOOT
Plans for a Balsa wood model. The plans cost 3’6 (about 30¢) in England some time before 1971. The title reads:-
“Airscrew driven hydrofoil, Designed by W. P. Holland
Copyright of Model Maker Plans Service
38, Clarendon Rd, Watford, Herts
All woods are Balsa unless otherwise stated”
102k
Model of proposed Flagstaff II made by Grumman, in three configurations.
More information
Model of Dolphin made by Anthony Morling
More information & more photos
1:20 scale model of RHS 140 Curl Curl Martin Grimm
More photos and some more information
Model of Boeing Jetfoil by Martin Seymour
(108k)

(35k)

(40k)
Model of USS Aquilla by R.J.A Swart.
Scale = 1:30, length 135 cm, beam 48 cm, weight 14 kg. The propulsion is by two electric motors in the aft foil.

(21k)

(27k)

(23k)
Bow and stern foils for the 1:16.667 scale model of a Rodriquez PT 50, owned by Garry Fry of Sydney, Australia. The model represents the hydrofoil Fairlight which had operated on Sydney harbour.
More information

(25k)

(51k)
Søfoil 4 designed and built by Søren Struntze of Copenhagen, Denmark
More Information

(28k)
Kit for model of Kometa Hydrofoil.
More information

(112k)

(112k)
Police Hydrofoil RC Ship Model made by Hegi
More information

(75k)
Microsail Hydrofoil
Website:-http://www.microsail.com/f3photos.html

(60k)
Freccia d’Oro Model by Vincenzo Annuario
It is a wooden 1/20 scale model of a PT50, with an electric motor, but it can also be fitted with two diesel engines.
Vincenzo can be contacted via Malin Dixon

(15k)

(16k)
PT50 Model by Jeffrey Wong
Jeffrey’s description:- “It is my 1:40 PT50 model of Gunze Sangyo. I had bought it in 1994 and it powered by the NOVAK 610RV speed controller with Tamiya 540VZ motor. These photos were taken in Hong Kong on Dec 23rd, 2003.”
Jeffrey can be contacted via Malin Dixon

(28k)

(37k)
Graham Taylor’s Model Hydrofoils
More pictures and more information
Simon Tang’s Model Hydrofoils
More pictures and more information
Yoichi Takahashi’s Model Hydrofoils, featuring automatic control systems and waterjet propulsion
More pictures and more information

Go To Main Page


This part of the site is maintained by Malin Dixon

Recent Posts

OPPORTUNITY BLOG

THE INTERNATIONAL HYDROFOIL SOCIETY — ESTABLISHED 1970
This site is being improved, patience please

Main menu

Joint Ventures Proposed to Operate, Manufacture/Market, or Design

Hydrofoils — Joint Ventures Proposed to Operate, Manufacture/Market, or Design

Messages are posted here as a service to IHS members and visitors to the website. Please be aware that IHS does not recommend products or services. While we know of no serious problems having arisen from messages posted here, we are not able to verify that offers posted here are legitimate or that individuals responding to the offers are sincere. Accordingly, caution should be exercised in initiating and conducting business as a result of messages posted here to ensure your personal safety and the safety of your financial account information.
Joint Venture Sought in Fiji

[3 Jul 03] I am looking for a partner to lease me a high powered boat with the following 70~100 passengers and with speed of 30~35 Knots. The service is geared towards the ferrying of tourists between islands . Matt (matai@mrd.gov.fj)
Joint Venture Sought in the Philippines

{23 Jun 03] I intend to operate a hydrofoil to serve the transportation of passengers between the two main islands in the Philippines. I plan to enter into a joint venture/partnership with a vessel/hydrofoil owner wherein the operation, management and manning will come from my side. Some important details to consider: Passenger capacity: 120-150; Speed: 35-40 kts. I am currently operating two fast crafts serving the same place. — Felicito Datinguinoo (luchijane@aol.com)
Hydrofoils — Wanted To Buy or Lease

Messages are posted here as a service to IHS members and visitors to the website. Please be aware that IHS does not recommend products or services. While we know of no serious problems having arisen from messages posted here, we are not able to verify that offers posted here are legitimate or that individuals responding to the offers are sincere. Accordingly, caution should be exercised in initiating and conducting business as a result of messages posted here to ensure your personal safety and the safety of your financial account information.More info on how and where to buy/sell/restore specific categories of hydrofoils can be accessed from our Posted Messages Bulletin Board Page. Please notify the webmaster if you discover a notice that is no longer valid, or if you are unsuccessful in contacting the individual or organization that posted the message.
Fast Ferry Expert to Assist in Procurement of Fleet

[14 Oct 03] My company is looking for a fast ferry expert to assist in the procurement of a small fleet of catamarans or hydrofoil vessels. We will consider purchase, lease, or joint venture partnership. Vessels must carry up to 150 plus passengers and travel at a minimum speed of 35 kts. Please contact me if you are interested and want more information. — Tom Dempsey dempsuryy@aol.com
Historic Hydrofoil(s) Wanted in France

[9 Sep 03] I seek a few old, small Russian hydrofoils in any type of condition (Raketa, Polysie or Belarus hydrofoil). This is to make a houseboats here in Toulouse, the air and space center of France… a few people are interested in this. Also, and in addition to the houseboat project, I want to start a non-profit association to restore one medium or large Russian experimental hydrofoil (Sputnik, Chaika for example)… so I am looking for a good candidate to restore for historical purposes. The hydrofoil for non-profit restoration should be an experimental craft. — Jeff Legendre (a1493@hotmail.com)
Need High-Speed Ferry Boat in Indonesia / Borneo

[12 Jul 03] I am looking for someone to sell, lease or joint venture with me a high powered boat with the following 80~100 passengers and with speed of 30~35 Knots. The service is geared towards the ferrying people between Tarakan Island and Kalimantan. — Villepin (villepin@hotmail.com) Click Here to post a response to this message.
Hydrofoil Vessels For Sale

Following are some of the more recent announcements. More info on how and where to buy/sell/restore hydrofoils can be accessed from our Posted Messages Bulletin Board Page. Please notify the webmaster if you discover a notice that is no longer valid, or if you get no reply when contacting the individual or organization that posted the message (unfortunately, many sellers have been remiss in notifying IHS when the vessel is sold).Messages are posted here as a service to IHS members and visitors to the website. Please be aware that IHS does not recommend products or services. While we know of no serious problems having arisen from messages posted here, we are not able to verify that offers posted here are legitimate or that individuals responding to the offers are sincere. Accordingly, caution should be exercised in initiating and conducting business as a result of messages posted here to ensure your personal safety and the safety of your financial account information..

.
Grumman Runabout -1958 Museum Piece

[20 Aug 02, updated 01 Oct 03] For Sale: Sea Wing Hydrofoil-Grumman 1958 14’8″. New Mercury 40 HP, Trailer, Original 35 HP Evenrude Lark (stuck), Morse Controls. Runs great. I am in Georgia USA. Can deliver in Southeast USA. $15,500.00. — Myrel Harner (ireneharner@juno.com)

.

.
Kolkhida Hydrofoil For Sale – DELFIN 1

[22 Sep 03] We have for sale a seagoing hydrofoil with capacity of 124 passengers. Click Here for Technical Specifications and full set of color photos, and details of the offer (Adobe Acrobat file, 400K). Price: 270.000 Euro FOB Kolobrzeg — Miroslaw Balicki, Kolobrzeg Passengers Shipping Company (kzp@pro.onet.pl)

.
New METEORS For Sale (Two)

[14 Jul 03] Zelenodolsk Shipyard, Russia announces that two (2) METEOR hydrofoils in production are for sale. Projected date of delivery is April 2004. Choice of Russian engines or Deutz (Germany) engines. Price ranges from 500 000 Euros to 950 000 Euros. Includes all certificates and our guarantee (1.5 year). — Sergey Nikonov (zdsip@nimb.ru)
KATRAN Hydrofoils For Sale

[12 Jul 03] We propose for sale from direct Owners following sea-going hydrofoils:

– Design “Katran” (“Kolkhida”), built by Volga Shipyard, Russia in 1996 (1995 2nd vessel);- The ship was built in compliance with the Rules and under the supervision of the Maritime Register of Shipping of Russia, class KM * 2 A3 Pass. Hydrofoil;- Reclassified by RINA, 100 – A -1.1; Nav S; TP;- USCG approval- Gross tonnage/Net tonnage: 135GT/53NT;- Engines: two MTU-made 12 V 396 TE 74 diesels, each of 1260 kW (1714 h.p.); 2nd vessel – two MTU-made 12 V 396 TC 82 diesels – each of 1050 kW (1430 h.p.);- Engines’ hours: less 3000– Passenger capacity – 140 (150 2nd vessel)Length, m 34,5Breadth, m 10,3Height above water (foil-borne), m 10,8Height above water (floating), m 8,9Floating draught, m 3,5Foil-borne draught, m 1,9Light displacement, t 56Full displacement, t 72Foil-borne sailing range, miles 200Foil-borne speed, kn 34Crew 5Both vessels are equipped with air-condition system.
Seaworthiness:
– The normal operating conditions for cruising foil-borne are sea state with waves up to 2 meters high and winds up to Force 5.
– The most unfavorable conditions for cruising hull-borne are sea state with wave height 3 meters and wind Force 6.

We recently inspected the hydrofoils and confirm that the vessels are well-maintained and are in tip-top condition. Inspectable in N.America by arrangement. Additional information is available upob firm/named interest. — Brgds/Vyacheslav Fyodorov ; Cielo Trading Ltd ; Tel: +38 048 743 80 85 ; Fax: +44 870 125 34 00 (via UK) ; Email: (slava@cielo-trading.net )

.
A Gas Turbine Engine For Your PHM

[2 Jun 03] GTE For Sale: proposed as suitable to replace the LM2500 in a surplus PHM or a commercial vessel requiring this kind of power: 20,000 HP. Built by Mashproekt in Ukraine; No operating time accumulated; Model designation D59 (original USSR designation for same model, only with a reversing mechanism: GT16000); Maximum continuous rating (MCR) – 20,000 hp in ISO conditions; Power turbine rated speed : 5200 rpm (A 3000 RPM power section is available from Russia for only $128,000 and it includes exhaust plenum and driveshaft ready to couple up to the PHM gearbox); Direction of rotation: counter-clockwise (looking at the output shaft flange), non-reversible (reversing mechanism not needed to power a water jet) ; Fuel control system operation: stabilized fuel flow rate; MTBO – 10 000 hr: (100% MCR – 300 hr, 80% MCR – 900 hr, 70% MCR and less -10 000 hr). If engine load never exceeds 70% MCR, MTBO can be extended to 20 000 hr.; Total life time – 60 000 hr. Stored in Michigan USA; Asking US$500,000 with 2 water jet drives. I would like to be put in touch with some boat builders around the Mediterranean area who might be interested. — E J Potter email: (potterej@earthlink.net); phone: 1-561-468-3587.

53-Page Technical Manual(Adobe Acrobat File – 612 kb)

Click Here

.[7 Nov 02] Looking for a good home for the H/V ALBATROSS. Hull and cabin are in good condition. However, she’s missing foils, strut, shaft, rudder, and engine. Anyone knowing of a museum, school, conservator, etc. interested in having it donated to them, please let me know. — Robert Miller cbbi@aol.com

Response…

[7 Nov 02] For historical and other information and photos about Bob Miller’s conversion of the ALBATROSS to a houseboat, Click Here. For historical information and photos about the ALBATROSS in its prime, see the Helmut Kock biography on this site.

.
Seahawk Ltd. Offers Olympias
[21 Oct 03] Two OLYMPIA type hydrofoil vessels for sale. Both in top condition. Hydrofoil passenger vessel. Built in Russia 1993 & 1994. Hull : alloy. L – 37.54, B – 8.40, Depth – 2.60, Draught 4.60/1.40, GRT – 298 T, NET – 89 T, DW – 82 T, Main engine – MTU 16V 396 T E 74 / 2×2000. Classification : Det Norske Veritas. Renovations : Both vessels are seriously renovated. Last serious renovation : 2000. Sale price US 1.5 MIO each. Location : Trading between Finland and Estonia
Seahawk Ltd. Offers Superfoil Ferry

[30 Sep 02, updated 21 Oct 03] Directly from the Owners can offer for sale the following air conditioned Superfoil passenger ferry. Main particulars: Built at : Almaz Marine Yard JSC, St.Petersburg, Russia in 2002; LOA : 41 m, B : 12.4 m, Draught : fully loaded at speed / 1.2 m, at rest with retracted foils / 1.7 m, at rest with foils in operational position / 3.4 m; Passenger capacity : 286; Main engines : MJP Waterjets (Mercedes) Type 4000 M70 / 4 x 1740 kW MCR / each 1900-2000 RPM / easy and quick dismantling of main and aux. engines; Gensets : TechnoScan TS90 / 2 x 70kW / 87 KV*A; Gearboxes : Four reversing flange-mounted ZF 4650 / electrically operated; Service speed at sea State 3 : 55 knots; Range (34t DW; 55 kn. speed ; 10% margin) 200 nautical miles; Seakeeping : 2.5 sign. wave height at 100% MCR; Foils : Two fully retractable hydraulically controlled forward fully submerged foils made of high-quality titanium alloy; Interceptors : Two hydraulically controlled transom interceptors made of high-quality titanium alloy; Foil & interceptors control system : MTD / AURORA active Foil & Interceptor; Control System. FICS-3 supplied; Rudders : Two hydraulically controlled suspended rudders made of high-quality titanium alloy providing great control improvement; Classification : DNV 1A1 HSLC R3 Passenger E0, IMO HSC Code, Category A; Accommodation : 62 passenger seats in business class with 1000 mm pitch, 224 passenger seats in tourist class with 900 mm pitch, Self-service bar in business class, Large kiosk/bar, 21 sq.m duty free shop, audio/video entertainment system; Deadweight: 34.000 kg.; Crew : 12×75 kg / 900 kg.; Luggage : 286 x 10 kg / 2860 kg.; Fuel oil : 4740 kg.; Fresh water : 1000 kg.; Duty free goods : 3.050 kg; Capacities : Fuel oil : 10.000 L. Fresh water : 2000 kg. Hydraulic oil : 200 L. Lube oil : 250 L. Waste oil : 250 L; Hull / superstructure : High quality marine grade aluminum alloy type 1561; Service life : 20 years; Environmentally friendly : Extremely low wash up to max speed, low noise. Fulfills IMO emission regulations of Year 2000. Sale price : USD 7.0 MIO; Location : Europe. — Y.Eero, Managing Director, Seahawk Ltd. (seahawk@estpak.ee)
Return to Home
Proudly powered by WordPress

  1. History Leave a reply
  2. Commercial & Passenger Leave a reply
  3. Military Leave a reply
  4. Building Foils Leave a reply
  5. Buy & Sell Leave a reply
  6. R & D Papers Leave a reply
  7. Small engine and human powered Leave a reply
  8. Models Leave a reply
  9. Design of Vessels: Hull-Machinery-Costs-Performance/Ops Leave a reply